Digitana SYNTHI VCS3 Poly MIDI-CV Manual - Página 10
Procurar online ou descarregar pdf Manual para Conversor de multimédia Digitana SYNTHI VCS3 Poly MIDI-CV. Digitana SYNTHI VCS3 Poly MIDI-CV 11 páginas.
Imprimir página
click to send sysex message
directly to the Poly Midi-
CV Unit and change the
play mode
Play mode choice
Midi Chan.
Lowest midi note
Poly MCV Unit
responds to
4 Digital to
analogue
converters (DAC's)
corresponding to
CV1-CV4 *
'PB'=pitch bend
* Note the labelling of the 4 DAC's is DAC0-DAC3 (as opposed to DAC1-DAC4 ) in the
configuration program. Also only 3 of the 4 DAC's are present on Poly Midi units so you may
ignore the fourth DAC setting.
You just have to remember that DAC0-DAC2 corresponds to CV1-CV3 as used in this guide.
Similarly you will notice that Gate1-Gate4 are labelled as 'Gate0-Gate3' in the program.
In the above example, if the send to flash button is clicked the Poly Midi Unit would be set to
Poly2 play mode. This means CV1 corresponds to Midi note 1 and gate G1 is triggered by Midi
note 1 on message; CV2 corresponds to Midi note 2 and Gate 2 is triggered when Midi note 2 on
message is received. Meanwhile CV3 is set to Pitch Bend (green box).
'write to Flash' button.
click to save the chosen play
mode into the flash memory
of the Poly Midi-CV
'VL'=Note Velocity
'presets' where you can
save your favourite play
modes settings for quick
change
limits maximum
CV to +5V