Cisco MX Series Manual de iniciação - Página 5

Procurar online ou descarregar pdf Manual de iniciação para Sistema de conferência Cisco MX Series. Cisco MX Series 34 páginas. Telepresence video systems
Também para Cisco MX Series: Manual de iniciação (41 páginas), Manual de iniciação (33 páginas), Manual de iniciação (42 páginas), Manual de iniciação (46 páginas)

Cisco TelePresence Video Systems



Introduction

How to configure your system

Use a provisioning system, or configure

each video system individually

Provisioning allows video conferencing network administrators

to manage many video systems simultaneously. In general, you

only have to put in the credentials of the provisioning server

to each video system; the rest of the configuration is done

automatically.

Without a provisioning system, you must configure each video

system individually. To be able to make calls, you must set

the IP address, if not provided by the network, and SIP/H.323

parameters. You should also set the correct time and date.

Basic configuration with or without a provisioning system is

described in this guide.

D15318.03 Video Systems Getting Started Guide CE8.2, JUNE 2016.

User interfaces

Web interface

User interfaces

The principal operating device for your Cisco TelePresence

video conference system is either a remote control or a Touch

controller. The remote control is not available for the DX and

MX series or the SX80.

You can configure your system through its web interface, if the

system is already connected to a network and you know the IP

address. A limited set of configurations is also available on the

Touch controller and the on-screen menu.

We describe the web interface, the on-screen setup assistant

and the Touch controller in the following chapter.

Setup assistant

Passphrase

Initially, no passphrase is set for the default

is mandatory to set a passphrase for any user with ADMIN

rights in order to restrict access to system configuration. This

includes the default admin user.

You can read more about how to set the passphrase in the

section

Getting Started Guide

Touch

Appendices

admin

"Passphrase" on page

19.

user. It