Sony BRAVIA FW-55X8501D Manual de referência - Página 2

Procurar online ou descarregar pdf Manual de referência para TV Sony BRAVIA FW-55X8501D. Sony BRAVIA FW-55X8501D 32 páginas.
Também para Sony BRAVIA FW-55X8501D: Manual de configuração (2 páginas)

Imprimir página
Sony BRAVIA FW-55X8501D Manual de referência

Table of Contents

Safety information . . . . . . . . . . . . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Parts and Controls . . . . . . . . . . . . . . . . . . . 9
Controls and Indicators . . . . . . . . . . . . . . . . . 9
Using Remote Control . . . . . . . . . . . . . . . 10
Connection Diagram . . . . . . . . . . . . . . . . 12
Installing the TV to the Wall . . . . . . . . . . 15
KD-75X9400D only). . . . . . . . . . . . . . . . . . . . 18
SU-WL450 (KD-65/55X9300D,
only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Troubleshooting . . . . . . . . . . . . . . . . . . . . 26
Troubles and Solutions . . . . . . . . . . . . . . . . 26
Specifications . . . . . . . . . . . . . . . . . . . . . . 27
2
GB
Introduction
Thank you for choosing this Sony product.
Before operating the TV, please read this manual thoroughly and
retain it for future reference.
Note
• Before operating the TV, please read the "Safety information"
(page 2).
• Instructions about "Installing the TV to the Wall" are included
within this TV's instruction manual.
• Images and illustrations used in the Setup Guide and this
manual are for reference only and may differ from the actual
product.
Location of the Setup Guide
Setup Guide is placed on top of the cushion inside the TV carton.
Help Guide
Help Guide explains the information on how to use the TV's
features. To display Help Guide on the TV, press HELP on the
remote control and select [Help Guide].
Location of the identification label
Labels for the TV Model No. and Power Supply rating are located
on the rear of the TV.
For models with supplied AC adapter:
Labels for the AC adapter Model No. and Serial No. are located
on the bottom of the AC adapter.
Notice for customers in Thailand
This telecommunication equipment conforms to NTC technical
requirement.
Notes for Australia and New Zealand model
This product is ENERGY RATING qualified in the default mode.
ENERGY RATING is a programme designed to promote energy
efficient products and practices.
• When the TV is initially set up, it is designed to meet ENERGY
RATING requirements while maintaining optimum picture
quality.
• Changes to certain features, settings and functionalities of this
TV (e.g. TV Guide, Picture/Sound, Eco setting) can slightly
change the power consumption.
Depending upon such changed settings (e.g. Shop mode), the
power consumption may vary which possibly could exceed the
stated energy rating.
To reset the TV to ENERGY RATING qualified settings, complete
the initial set-up procedure in [Settings]
[Factory data reset].
After factory data reset, downloaded application data will be
deleted. Please download them again.

Safety information

WARNING
Batteries must not be exposed to excessive heat such as
sunshine, fire or the like.
Never place a television set in an unstable location. A television
set may fall, causing serious personal injury or death. Many
injuries, particularly to children, can be avoided by taking simple
precautions such as:
 Using cabinets or stands recommended by the manufacturer of
the television set.
 Only using furniture that can safely support the television set.
 Ensuring the television set is not overhanging the edge of the
supporting furniture.
 Not placing the television set on tall furniture (for example,
cupboards or bookcases) without anchoring both the furniture
and the television set to a suitable support.
 Not placing the television set on cloth or other materials that
may be located between the television set and supporting
furniture.
 Educating children about the dangers of climbing on furniture
to reach the television set or its controls.
If your existing television set is being retained and relocated, the
same considerations as above should be applied.
t
t
[Storage & reset]