Argo CLIMIA CMK 4000 WiFi Manual de Instruções - Página 4

Procurar online ou descarregar pdf Manual de Instruções para Ar condicionado Argo CLIMIA CMK 4000 WiFi. Argo CLIMIA CMK 4000 WiFi 20 páginas. Room air conditioner with remote condenser

Imprimir página

Room air conditioner with remote condenser

04 - PRODUCT IDENTIFICATION

11. Infrared rays remote control unit

12. Monitor panel

13. Supply air deflector

14. Return air grille

15. Outdoor unit

16. Flexible tube

17. Air filter

18. Power cable with plug (about 2.30 m)

19. Service tube for condensate evacuation

10. Quick coupling cover

05 - MONITOR PANEL

Definition of the LED lamps:

Timer = YELLOW

Operation = GREEN

Standby = RED

1. Time setting lamp (TIMER): This lamp lights up when a timer is activated (see section "TIMER SELECTION").

2. OPERATION lamp: This lamp lights up when you switch on the unit.

3. STANDBY lamp: This lamp lights up when the air conditioner is connected to the power and ready to receive the remote

control command.

4. Receiver: It receives signals transmitted from the remote control.

5. Operation button (without remote control): Push the button to switch on or off the unit (see section "OPERATION WITHOUT

REMOTE CONTROL UNIT"). Press and hold this button for 5 seconds to enable the WiFi configuration (Only for WiFi models, see

"WiFi INSTRUCTIONS" manual).

WARNING

The OFF position does not disconnect the power. Use the main power switch to turn off power completely.

NOTE

Please note that the color representation of the control panel on the device may vary and that the representation in these

operating instructions may differ. However, this does not affect the functionality and is purely optical in nature.

NOTE

Only if an error message is displayed, it may be necessary to carefully unplug the indoor unit to drain excess water. In other

cases, the plug should not be removed.

CMK 4000