DigiTech RP500 Adenda - Página 2
Procurar online ou descarregar pdf Adenda para Pedal de música DigiTech RP500. DigiTech RP500 4 páginas. Installs cubase le 4, x-edit, and usb drivers
Também para DigiTech RP500: Manual de instalação do software (12 páginas), Manual de início rápido (2 páginas)
Imprimir página
Updating your RP500
To update your RP500 with the version 2.0 firmware, follow these steps:
. Connect your RP500's USB cable to an available USB port on your computer
and power the RP500.
2. Backup your RP500 using X-Edit.
ATTENTION: ALL PRESETS WILL BE ERASED DURING THE
UPDATE PROCESS. BE SURE TO BACKUP THE RP500 FIRST
USING X-EDIT BEFORE UPDATING!!
3. Visit
www.digitech.com/software_support/
4. Select RP500 from the Select Product menu and then select the operating
system for your computer from the Select Operating System menu.
5. Click the 1. Download Files tab and download the NetUpdater application
to your desktop.
6. Launch the NetUpdater application and follow the onscreen instructions to
update your RP500 to version 2.0.
7. Use X-Edit to restore the backup you made to the RP500.
Once your RP500 is successfully updated, you can now begin using the new
Looper feature.
Using the RP500's Looper
The RP500 now includes a dedicated Looper phrase sampler that lets you
record up to 20 seconds of your guitar playing and play it back as an endless
loop so you can solo over it. Once a loop is recorded, you can also add more
guitar parts to the recorded loop (overdub). What's great about the RP500's
Looper is that even while the Looper is playing back and/or recording you can
still select different presets or turn on and off effects to add different sounds
to your loop or overdubs. When the Looper is turned on, the Up/Down
footswitches will not select preset banks (Preset Mode) or select presets
(Pedalboard Mode). You can use the -5 footswitches to do this.
There are two ways to use the Looper: with a "quiet start" or "on the fly."
"Quiet start" means you "Arm" the Looper's record feature when you're not
playing your guitar, and then it automatically starts recording when you start
playing. "On the fly" means you arm the record feature while you're playing,
and the Looper starts recording as soon as you step on the Down footswitch.
To use the Looper with a quiet start, follow these steps:
. Press and hold the Up Footswitch for 2 seconds until LOOPER appears in
the display indicating the Looper is now active.
2. To begin looping, press the Down Footswitch. The Display will show
ARMED indicating the Looper is armed and ready to record but not actually
recording yet.
using your web browser.