cable matters 201075 Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Estação de ancoragem cable matters 201075. cable matters 201075 12 páginas. Usb-c kvm dock for 2 computers

Imprimir página
3.4 Troubleshooting Tips
•
Verify that the dock is powered on, the blue LED light is lit and all cables
are securely connected
•
Verify that correct cables are connected:
- USB-C cable to the source computer
- Source computers to the USB-C ports at the rear of the dock
- Display cables to HDMI and/or DisplayPort ports on monitor(s)
- USB devices to the USB ports on the dock
•
Holding the button 1 & 2 for 5 seconds, the rapidly-blinking LED lights
indicate the remote control function is turned off, the slowly-blinking LED
lights indicate the remote control function is turned on.
•
Check if driver installation is required for the attached devices on the
connected computers
•
Test each cable or equipment directly with other equipment
•
Restart or reconnect the dock by unplugging and re-plugging it back in
•
If USB keyboards, mice, or other devices do not work or intermittently lose
connection, connect them to the two USB 2.0 ports at the rear. Try a lower
display resolution and refresh rate if monitors do not work
•
Host device(s) must support DisplayPort Alternate Mode (DP 1.2 or DP
1.4) for video
•
Try a different USB-C port on the host device
•
Apple M1/M2 devices are limited to one external monitor
•
Some devices with Intel integrated graphics may require a graphics update
from Intel's website
with any questions
www.cablematters.com
6
®
USB-C
KVM Dock for 2 Computers