Sony 10001 Manual de instalação - Página 16
Procurar online ou descarregar pdf Manual de instalação para Câmara de vídeo Sony 10001. Sony 10001 50 páginas. A/v multiplexer board, a/v demultiplexer board
Também para Sony 10001: Manual de instalação (28 páginas)
Imprimir página
1-8. Signal Inputs and Outputs
1-8. Signal Inputs and Outputs
Remote connectors
8 REMOTE PARALLEL I/O (50P)
9 VIDEO CONTROL
9 RS-232C
9 REMOTE1-OUT (9P)
9 REMOTE1-IN (9P)
9 CONTROL PANEL
Input connectors
1 VIDEO INPUT, REF.VIDEO
1 VIDEO INPUT, COMPOSITE
(DNW-75/75P only)
1 VIDEO INPUT, COMPONENT
(DNW-75/75P only)
3 SDI
(DNW-75/75P only)
4 AUDIO INPUT
(DNW-75/75P only)
5 TIME CODE IN
(DNW-75/75P only)
7 AUDIO INPUT (AES/EBU)
(DNW-75/75P only)
1-10
< Reduced drawing of rear panel >
1
2
3
5
4
6
9
D-SUB 50P connector (Refer to Optional "Interface manual" for details.)
D-SUB 15P connector
for a TBC remote controller (BVR-50) connection
D-SUB 9P connector (RS-232C interface)
for ISR (Interactive Status Reporting)
D-SUB 9P connector (RS-422A interface)
Remote control
D-SUB 9P connector (RS-422A interface)
Remote control
D-SUB (mini) 29P connector
for an outside control panel connection only
BNC x 2 in loop through connection
Outside reference video signal (Black burst or composite sync)
0.3 V p-p, 75 Z, sync negative
BNC x 2 in loop through connection
Analog composite video 1.0 V p-p, 75 Z, sync negative
BNC x 3 (1 set : Y, R-Y, and B-Y)
Analog component video
Y
: 1.0 V p-p, 75 Z, sync negative
R-Y/B-Y : 0.7 V p-p, 75 Z
BNC x 1 (active through out x 1)
Serial digital interface (270 Mbit/s), complies with SMPTE 259M & ITU-R BT.656
XLR3-pin x 4 (1 set : CH1,CH2, CH3, and CH4)
Analog audio 4 channels
LOW OFF : _60 dBu, high impedance, balanced
HIGH OFF : +4 dBu (Standard), high impedance, balanced
HIGH ON : +4 dBm (Standard), 600 Z termination, balanced
XLR3-pin x 1
Time code 0.5 to 18 V p-p, 10 kZ, balanced
BNC x 2 (1 set : CH1/2 and CH3/4)
Digital audio 4 channels
AES/EBU format, complies with AES-3id-1995
!/
7
8
DNW-75/75P
DNW-65/65P