Cisco Webex Room Kit Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Sistema de conferência Cisco Webex Room Kit. Cisco Webex Room Kit 24 páginas.
Também para Cisco Webex Room Kit: Manual de instalação (13 páginas), Manual do utilizador (36 páginas), Manual de referência rápida (3 páginas), Manual de instalação (17 páginas)

Feature Support

The phone has four built-in microphones to provide 360-degree coverage. This coverage lets you speak in a

normal voice and be heard clearly from up to 10 feet (3 m) away. It also features technology that resists

interference from mobile phones and other wireless devices. This assures delivery of clear communications

without distractions. With the base unit alone, the phone provides coverage for a 20 x 20 feet (6.1 m x 6.1 m)

room and up to 10 people.

Two wired expansion microphones are available for use with the phone. Placing the expansion microphones

away from the base unit provides greater coverage in larger conference rooms. With the base unit and wired

expansion microphones, the phone provides coverage for a 20 x 34 feet (6.1 m x 10 m) room and up to 22

people.

Feature Support

This document describes all the features that the device supports. However, not all features may be supported

with your current configuration. For information on supported features, contact your administrator.

Your administrator sets up your phone and connects it to the network. If your phone is not set up and connected,

contact your administrator for instructions.

After the phone connects to the network, the phone startup process begins, and the phone connects with your

network. If you disable the DHCP service, you must configure the network settings on the phone.

After the phone connects, it downloads a new firmware load if needed.

Before you begin

Choose the power source for the phone:

• Power over Ethernet (PoE)—For administrators who require a consistent AC power source but only want

• Ethernet with a Cisco Aironet Power Injector—For administrators who require a consistent, efficient AC

Procedure

Connect the phone to the network.

• If you use PoE:

• If you do not use PoE:

Cisco Webex Room Phone User Guide

REVIEW DRAFT - CISCO CONFIDENTIAL

a single cable. PoE is easier to manage, but it can use more electricity. You should confirm that your

device connects to a RJ-45 port that supports PoE.

power source and who have space for additional cables.

a. Plug the Ethernet cable to the LAN port.

b. Plug the other end of the Ethernet cable to the RJ-45 port on the rear side of the phone.

Your Phone