Argo snappy Manual de Instruções - Página 6

Procurar online ou descarregar pdf Manual de Instruções para Ar condicionado Argo snappy. Argo snappy 12 páginas. Local air conditioner

Cooling

THE DISCHARGE TUBE MUST BE CONNECTED to the appliance AT ALL TIMES: the only exception is when the

appliance is used for Dehumidification only, in which case it is recommended that the appliance discharges

directly into the environment to obtain maximum efficiency (see the paragraph entitled "Dehumidification Mode").

Clean the air filters under the easily removable side panels regularly to keep the air conditioner working efficiently.

 The first time it is turned on, the air conditioner will operate in Cooling mode with the temperature set to 25ºC by

default. The LED COOLING will switch on.

 The temperature can be adjusted between 17° and 30°C.

 In this way, each time the Power button

set and when switched back on again, it will retain this setting.

 In this way, fan speed can be adjusted(button

 For a quieter operation set the speed to minimum (LO).



Press FUNC



The temperature is controlled by the electronic card and cannot be regulated.



In this way, each time the Power button

when switched back on again, it will retain them.



In this way it is possible to set the TIMER.



Fan speed is fixed to low (LO) and cannot be adjusted.

NOTE

The air-conditioner does not cool the environment when operating as a dehumidifier.

When the appliance is used as a dehumidifier, the flexible hose must not be connected.

For maximum dehumidification efficiency, leave the rear discharge attachment free to discharge directly into

the environment.

Dehumidification mode is recommended in autumn and winter.

If used in summer, it is better to leave the flexible hose attached, in order to send the hot air outside rather

than releasing it into the environment.

During dehumidification, it is better to ensure continuous drainage (see paragraph entitled "HOW TO ELIMINATE

CONDENSATION").

V 11/13

OPERATING MODES

to select Dehumidification (DEHUMIDIFY). The LED will switch on.

Heating

s pressed, the unit switches off, the appliance saves the temperature

)

, Timer can be adjusted and also "SLEEP function".

is pressed, the unit switches off, the appliance saves the settings and

Dehumidification