Cisco 2691 Series Manual do utilizador - Página 34
Procurar online ou descarregar pdf Manual do utilizador para Hardware de rede Cisco 2691 Series. Cisco 2691 Series 48 páginas. Modular routers
Também para Cisco 2691 Series: Instalação e formatação (34 páginas), Ficha de dados (8 páginas), Manual de início rápido (29 páginas)
Imprimir página
The Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, 3745, and 7206 VXR NPE-400 Routers
Figure 23
NM -H DV
BA NK 4
BA NK 3
To apply tamper-evidence labels to the Cisco 7206 VXR NPE-400:
Step 1
Clean the cover of any grease, dirt, or oil before applying the tamper evidence labels. Alcohol-based
cleaning pads are recommended for this purpose. The temperature of the router should be above 10°C.
Step 2
Place the first label on the router as shown in
that the one half of the label covers the enclosure and the other half covers the 7206 VXR NPE-400
Input/Output Controller.
Place the second label on the router as shown in
Step 3
over the Flash PC Card slots on the Input/Output Controller.
Place the third label on the router as shown in
Step 4
so that one half of the label covers the enclosure and the other half covers the port adapter slot 1.
Place the fourth label on the router as shown in
Step 5
so that one half of the label covers the enclosure and the other half covers the port adapter slot 2.
Place the fifth label on the router as shown in
Step 6
that one half of the label covers the enclosure and the other half covers the port adapter slot 3.
Place the sixth label on the router as shown in
Step 7
so that one half of the label covers the enclosure and the other half covers the port adapter slot 4.
Place the seventh label on the router as shown in
Step 8
so that one half of the label covers the enclosure and the other half covers the port adapter slot 5.
Place the eighth label on the router as shown in
Step 9
so that one half of the label covers the enclosure and the other half covers the port adapter slot 6.
Place the ninth label on the router as shown in
Step 10
so that one half of the label covers the enclosure and the other half covers the network processing engine.
Cisco 1721, 1760, 2621XM, 2651XM, 2691, 3725, and 3745 Modular Access Routers and 7206-VXR NPE-400 Router FIPS 140-2 Non-Proprietary
34
Cisco 3725 and Cisco 3745 Tamper Evidence Label Placement
BA NK 2
BA NK 1
BA NK 0
V0
SEE MAN
UAL BEF
DS U
ORE INS
TAL LAT ION
EN
56K
SEE MAN
UAL BEF
ORE INS
DS U
TAL LAT ION
56K
SEE MAN
UAL BEF
ORE INS
TAL LAT ION
Figure
24. The tamper evidence label should be placed so
Figure
24. The tamper evidence label should be placed
Figure
24. The tamper evidence label should be placed
Figure
24. The tamper evidence label should be placed
Figure
24. The tamper evidence label should be placed so
Figure
24. The tamper evidence label should be placed
Figure
24. The tamper evidence label should be placed
Figure
24. The tamper evidence label should be placed
Figure
24. The tamper evidence label should be placed
OL-6083-01