Argo beatIP21 Instruções de utilização - Página 2
Procurar online ou descarregar pdf Instruções de utilização para Aquecedor Argo beatIP21. Argo beatIP21 4 páginas. Bathroom ceramic fan heater
Imprimir página Use this fan heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire,
electric shock or injury to people.
Ensure that the mains power complies with the voltage specified on the fan heater 's data plate (220-240V~/50Hz).
This product is not a toy. Children should be adequately supervised to ensure that they do not play with the appliance.
This appliance is not suitable for use by people (including children) with reduced physical, sensory or mental abilities, or
without the necessary experience and knowledge, unless they have been adequately supervised and instructed
concerning use of the appliance by a person responsible for their safety.
Do not restrict the air inlet and outlet grilles.
The appliance heats up slightly when in use. In order to avoid burns, do not let bare skin touch hot surfaces.
Ensure that all objects are at least 1 meter from the front and sides of the appliance.
Disconnect the mains power when the appliance is not used or for cleaning operations.
Avoid using the fan heater in dusty environments or in the presence of inflammable vapours (e.g. in workshops or
garages) or paint vapours.
Do not place anything on the appliance, use the appliance to dry clothing.
Use the appliance in a well-ventilated area.
Avoid placing fingers or foreign objects in the air inlet/outlet grilles, as this may lead to electric shock or fire and may
damage the appliance.
To avoid the risk of fire, do not block the grilles or tamper with them in any way while the fan heater operates.
Do not use the appliance if the cord or plug are damaged. If the power supply cord is damaged, it must be replaced
by the manufacturer, dealer or a similarly qualified person so as to avoid any safety risks.
Do not operate the appliance if it has fallen from a height or has suffered damage in any way. Contact qualified technical
personnel to examine the appliance or perform any electrical or mechanical repairs.
The most common cause of overheating is the build-up of dust in the appliance. Remove dust deposits by unplugging the
appliance and cleaning the air outlets and grilles with the aid of a vacuum cleaner.
Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a damp (not wet) cloth
rinsed in hot soapy water. Always remove the plug from the mains socket before cleaning.
To disconnect the fan heater, push the switch to OFF and remove the plug from the socket. Pull on the plug only. Avoid
pulling on the cord when disconnecting the fan heater.
Do not place any objects on the cord and do not bend it.
It is not advisable to use extension cords, as these may overheat and cause the risk of fire. Do not use a single extension
cord to operate multiple appliances.
Do not immerse the cord, plug or any other element of the appliance in water or other liquids.
Do not touch the plug with wet hands.
Do not place the fan heater above or near another heat source.
WARNING: AVOID COVERING THE FAN HEATER TO PREVENT IT FROM OVERHEATING.
The symbol below signals the above warning:
The fan heater may cause the risk of fire if, while in operation, is covered by or comes into contact with inflammable
material including curtains, drapery, blankets, etc. KEEP THE FAN HEATER AWAY FROM THESE MATERIALS.
Do not connect the appliance to the mains power before it has been properly assembled and positioned.
Do not run the cord under carpets. Do not cover the cord with blankets, carpets or similar materials. Place the cord far
away from busy areas or where it cannot be accidentally pulled-out.
Do not operate the fan heater in close proximity to bathtubs, showers, washbasins or pools.
The appliance is equipped with an IP21 degree of protection and can be used in private bathrooms in zone 3.
V 05/13
GENERAL SAFETY INFORMATION
6