Argo CLOE Manual de Instruções - Página 4

Procurar online ou descarregar pdf Manual de Instruções para Aquecedor Argo CLOE. Argo CLOE 12 páginas. Ceramic table fan heater

 To avoid the risk of fire, do not block the grilles or tamper with them

in any way while the fan heater operates.

 Do not use the appliance if the cord or plug are damaged. If the

power cable is damaged, it must be replaced by the manufacturer or

its technical assistance service or in any case by a person with a

similar qualification, in order to prevent any risk.

 Do not operate the appliance if it has fallen from a height or has

suffered damage in any way. Contact qualified technical personnel

to examine the appliance or perform any electrical or mechanical

repairs.

 The most common cause of overheating is the build-up of dust in

the appliance. Remove dust deposits by unplugging the appliance

and cleaning the air outlets and grilles with the aid of a vacuum

cleaner.

 Do not use abrasive detergents for cleaning this appliance. Clean

the appliance with the aid of a damp (not wet) cloth. Always remove

the plug from the mains socket before cleaning.

 To disconnect the fan heater, push the switch to OFF and remove

the plug from the socket. Pull on the plug only. Avoid pulling on the

cord when disconnecting the fan heater.

 Do not place any objects on the cord and do not bend it.

 Before the use of appliance, ensure that the power cord

is fully extended to prevent it from coming into contact with any part

of the heater.

 It is not advisable to use extension cords, as these may overheat

and cause the risk of fire. Do not use a single extension cord to

operate multiple appliances.

 Do not immerse the cord, plug or any other element of the appliance

in water or other liquids.

 Do not touch the plug with wet hands.

 Do not place the fan heater above or near another heat source.

V 05/21