Cisco 7600 Series Manual do utilizador - Página 2

Procurar online ou descarregar pdf Manual do utilizador para Hardware de rede Cisco 7600 Series. Cisco 7600 Series 14 páginas. Cisco 7609: frequently asked questions
Também para Cisco 7600 Series: Perguntas mais frequentes (5 páginas)

Imprimir página

Identifying Slots and Subslots for SIPs and SPAs

Checking Hardware and Software Compatibility

To check the minimum software requirements of Cisco IOS software with the hardware installed on your

router, Cisco maintains the Software Advisor tool on Cisco.com. This tool does not verify whether SIPs

or SPAs within a system are compatible, but it does provide the minimum Cisco IOS requirements for

individual hardware modules or components.

Access to this tool is limited to users with Cisco.com login accounts.

Note

To access Software Advisor, click Login at Cisco.com, type "Software Advisor" in the SEARCH box,

and click GO. Click the link for the Software Advisor tool.

Choose a product family or enter a specific product number to search for the minimum supported

software release needed for your hardware.

Identifying Slots and Subslots for SIPs and SPAs

This section describes how to specify the physical locations of a SIP and SPA on the Cisco 7600 series

routers within the command-line interface (CLI) to configure or monitor those devices.

For simplicity, any reference to "SIP" in this section also applies to the SSC.

Note

Specifying the Slot Location for a SIP or SSC

The Cisco 7600 series router supports different chassis models, each of which supports a certain number

of chassis slots.

The Cisco 7600 series router SIPs are not supported with a Supervisor Engine 1, Supervisor Engine 1A,

Note

Supervisor Engine 2, or Supervisor Engine 720-3A.

Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide

2-2

Chapter 2

Overview: Cisco 7600 Series SIPs

OL-5052-14