Sony a7 RV Manual de arranque - Página 2

Procurar online ou descarregar pdf Manual de arranque para Câmara digital Sony a7 RV. Sony a7 RV 2 páginas. Interchangeable lens digital camera
Também para Sony a7 RV: Manual de arranque (2 páginas)

Imprimir página

Connecting the camera to a smartphone

To use Imaging Edge Mobile, you need to pair the camera with your smartphone.

Follow the steps below to perform pairing.

On the camera, select MENU 

(Network)  [Smartphone Connect]

 [Smartphone Regist.].

Following the instructions on the screen, set [Bluetooth Function] to [On].

The pairing screen will appear.

• If [Bluetooth Function] is already set correctly, the pairing screen will be

displayed immediately.

Launch Imaging Edge Mobile on your smartphone and follow the on-

screen instructions to perform pairing.

For details on the pairing method, refer to the following Help Guide (Web

manual) URL:

https://rd1.sony.net/help/ilc/2230_pairing/h_zz/

Note

• The operation method and screen display of the application may change without

notice due to future version upgrades.

• If you performed pairing after setting the date and time, you do not need to

perform this step.

Notes on use

Refer to "Precautions" in the "Help Guide" as well.

Notes on handling the product

• This camera is designed to be dust-and moisture-resistant, but is not waterproof or dust-proof.

• Do not leave the lens or the viewfinder exposed to a strong light source such as sunlight.

Because of the lens's condensing function, doing so may cause smoke, fire, or a malfunction

inside the camera body or the lens. If you have to leave the camera exposed to a light source

such as sunlight, attach the lens cap to the lens.

• If sunlight or other strong light enters the camera through the lens, it may focus inside the

camera and cause smoke or fire. Attach the lens cap when storing the camera. When shooting

with backlighting, keep the sun sufficiently far away from the angle of view. Even if it is slightly

away from the angle of view, smoke or fire may still occur.

• Do not directly expose the lens or the viewfinder to beams such as laser beams. This may

damage the image sensor or the inside of the viewfinder and cause the camera to malfunction.

• Do not look at sunlight or a strong light source through the lens when it is detached. This may

result in unrecoverable damage to the eyes or cause a malfunction.

• This camera (including accessories) has magnet(s) which may interfere with pacemakers,

programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not

place this camera close to persons who use such medical devices. Consult your doctor before

using this camera if you use any such medical device.

• Increase the volume gradually. Sudden loud noises can damage your ears. Be especially careful

when listening to headphones.

• Do not leave the camera, the supplied accessories, or memory cards within the reach of infants.

They may be accidentally swallowed. If this occurs, consult a doctor immediately.

Notes on the monitor and electronic viewfinder

• The monitor and electronic viewfinder are manufactured using extremely high-precision

technology, and over 99.99% of the pixels are operational for effective use. However, there

may be some small black dots and/or bright dots (white, red, blue or green in color) that

constantly appear on the monitor and electronic viewfinder. These are imperfections due to the

manufacturing process and do not affect the recorded images in any way.

• When shooting with the viewfinder, you may experience symptoms such as eyestrain, fatigue,

motion sickness, or nausea. We recommend that you take a break at regular intervals when you

are shooting with the viewfinder.

• If the monitor or electronic viewfinder is damaged, stop using the camera immediately. The

damaged parts may harm your hands, face, etc.

Notes on continuous shooting

When shooting still images continuously, the monitor or viewfinder may flash between the

shooting screen and a black screen. If you keep watching the screen in this situation, you

may experience uncomfortable symptoms such as feeling of unwellness. If you experience

uncomfortable symptoms, stop using the camera, and consult your doctor as necessary.

Notes on recording for long periods of time or recording 4K/8K movies

• The camera body and battery may become warm with use – this is normal.

• If the same part of your skin touches the camera for a long period of time while using the

camera, even if the camera does not feel hot to you, it may cause symptoms of a low-

temperature burn such as redness or blistering. Pay special attention in the following situations

and use a tripod, etc.

- When using the camera in a high temperature environment

- When someone with poor circulation or impaired skin sensation uses the camera

- When using the camera with [Auto Power OFF Temp.] set to [High]

Notes on using memory cards

• When recording is finished, the memory card may become hot. This is not a malfunction.

• If

(overheating warning icon) is displayed on the monitor, do not remove the memory card

from the camera right away. Instead, wait for a while after turning off the camera, and then

remove the memory card. If you touch the memory card while it is hot, you may drop it and the

memory card may be damaged. Be careful when removing the memory card.

Notes on using a tripod

Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise, you cannot firmly

secure the camera, and damage to the camera may occur.

Sony lenses/accessories

Using this unit with products from other manufacturers may affect its performance, leading to

accidents or malfunction.

Warning on copyrights

Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized

recording of such materials may be contrary to the provisions of the copyright laws.

Notes on location information

If you upload and share still images or movies taken with this camera on the

Internet while the location information is linked with the dedicated smartphone

application, you may accidentally reveal the location information to a third party.

To prevent third parties from obtaining your location information, deactivate the

[Location Information Linkage] function of the dedicated application.

Notes on discarding or transferring this product to others

Before discarding or transferring this product to others, be sure to perform the following

operation to protect private information.

• Select [Setting Reset]  [Initialize].

Notes on discarding or transferring a memory card to others

Executing [Format] or [Delete] on the camera or a computer may not completely delete the data

on the memory card. Before transferring a memory card to others, we recommend that you

delete the data completely using data deletion software. When discarding a memory card, we

recommend that you physically destroy it.

Note on network functions

When you use network functions, unintended third parties on the network may access the

camera, depending on the usage environment. For example, unauthorized access to the camera

may occur in network environments to which another network device is connected or can

connect without permission. Sony bears no responsibility for any loss or damage caused by

connecting to such network environments.

Note on the 5 GHz band for wireless LAN

When using the wireless LAN function outdoors, set the band to 2.4 GHz by following the

procedure below. (WW282174 only)

• MENU 

(Network)  [Wi-Fi]  [Wi-Fi Frequency Band]

How to turn off wireless network functions (Wi-Fi, etc.) temporarily

When you board an airplane, etc., you can turn off all wireless network functions temporarily

using [Airplane Mode].

Power Cord

Multiple power cords may be supplied with this

(A)

equipment. Use the appropriate one that matches

your country/region.

For the customers in the UK, Ireland, Malta, Cyprus

and Saudi Arabia

Use the power cord (A).

For safety reasons, the power cord (B) is not intended

for above countries/regions and shall therefore not

be used there.

For the customers in other EU countries/regions

Use the power cord (B).

For Customers in the U.S.A. and Canada

The available scientific evidence does not show that any health problems are associated with

using low power wireless devices. There is no proof, however, that these low power wireless

devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency

energy (RF) in the microwave range while being used. Whereas high levels of RF can produce

health effects (by heating tissue), exposure of low-level RF that does not produce heating effects

causes no known adverse health effects. Many studies of low-level RF exposures have not found

any biological effects. Some studies have suggested that some biological effects might occur,

but such findings have not been confirmed by additional research. This equipment has been

tested and found to comply with FCC/ISED radiation exposure limits set forth for an uncontrolled

environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the

ISED radio frequency (RF) Exposure rules.

For Customers in the U.S.A.

For question regarding your product or for the Sony Service Center nearest you, call 1-800-222-

SONY (7669) .

Supplier's Declaration of Conformity

Trade Name : SONY

Model : WW282174

Responsible Party : Sony Electronics Inc.

Address : 16535 Via Esprillo, San Diego, CA 92127 U.S.A.

Telephone Number : 858-942-2230

Important note on use of 5 GHz wireless LAN

Compliance with FCC requirement 15.407(c)

Data transmission is always initiated by software, which is the passed down through the MAC,

through the digital and analog baseband, and finally to the RF chip. Several special packets are

initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF

transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on

only while one of the aforementioned packets is being transmitted. In other words, this device

automatically discontinue transmission in case of either absence of information to transmit or

operational failure.

Frequency Tolerance: ±20 ppm

For Customers in Canada

5 150-5 350 MHz band is restricted to indoor operation only.

High-power radars are allocated as primary users (i.e. priority users) of the bands 5 250-

5 350 MHz and 5 650-5 850 MHz and that these radars could cause interference and/or damage

to LE-LAN devices.

For Customers in Europe

IEEE802.11b/g/n

2 400 MHz

IEEE802.11a/n/ac

5 150-5 350 MHz

5 470-5 725 MHz

IEEE802.11a/n/ac

5 725-5 850 MHz

Bluetooth

2 400 MHz

Hereby, Sony Corporation declares that this equipment is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address:

https://www.compliance.sony.eu

Hereby, Sony Corporation declares that this equipment is in compliance with the UK relevant

statutory requirements.

The full text of the declaration of conformity is available at the following internet address:

https://compliance.sony.co.uk

For this radio equipment the following restrictions on putting into service or of requirements for

authorization of use apply in AT/BE/BG/CY/CZ/DK/EE/FI/FR/DE/EL/HU/IE/IT/LV/LT/LU/MT/NL/

PL/PT/RO/SK/SI/ES/SE/UK/UK(NI)/HR/IS/LI/NO/CH/AL/BA/MK/MD/RS/ME/XK/TR:

5 150 - 5 350 MHz band is restricted to indoor operations only.

For Customers in Indonesia

IEEE802.11b/g/n

Bluetooth

For customers who purchased their camera from a store in

Japan that caters to tourists

Note

Some certification marks for standards supported by the camera can be confirmed on the screen

of the camera.

Select MENU 

Specifications

Camera

[System]

Camera Type:

Interchangeable Lens Digital Camera

Lens: Sony E-mount lens

[Image sensor]

Image format: 35 mm full frame (35.7 mm ×

23.8 mm), CMOS image sensor

Effective pixel number of camera:

Approx. 61 000 000 pixels

Total pixel number of camera:

(B)

Approx. 62 500 000 pixels

[Electronic Viewfinder]

Type: 1.6 cm (0.64 type)

Electronic Viewfinder

[Monitor]

8.0 cm (3.2 type) TFT drive, touch panel

[General]

Rated input: 7.2 V

Operating temperature:

0 °C to 40 °C (32 °F to 104 °F)

Storage temperature:

–20 °C to 55 °C (–4 °F to 131 °F)

Dimensions (W/H/D) (Approx.):

131.3 × 96.9 × 82.4 mm

131.3 × 96.9 × 72.3 mm

(from grip to monitor)

5 1/4 × 3 7/8 × 3 1/4 in.

5 1/4 × 3 7/8 × 2 7/8 in.

(from grip to monitor)

Mass (Approx.):

723 g (1 lb 9.6 oz) (including battery

pack, SD Card)

Trademarks

•

is a trademark of Sony Group Corporation.

• USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.

• Wi-Fi, the Wi-Fi logo and Wi-Fi Protected Setup are registered trademarks or trademarks of the

Wi-Fi Alliance.

• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.

and any use of such marks by Sony Group Corporation and its subsidiaries is under license.

• QR Code is a trademark of Denso Wave Inc.

• In addition, system and product names used in this manual are, in general, trademarks or

registered trademarks of their respective developers or manufacturers. However, the ™ or ®

marks may not be used in all cases in this manual.

< 60 mW e.i.r.p.

< 35 mW e.i.r.p.

< 25 mW e.i.r.p.

< 10 mW e.i.r.p.

Additional information on this product and answers to frequently asked questions can be

found at our Customer Support Website.

2 400 MHz

(Setup)  [Setup Option]  [Certification Logo].

[Wireless LAN]

WW282174 (see name plate on the bottom

of camera)

Supported format: IEEE 802.11 a/b/g/n/ac

Frequency band: 2.4 GHz/5 GHz

Security: WEP/WPA-PSK/WPA2-PSK

Connection method:

Wi-Fi Protected Setup™ (WPS)/Manual

Access method: Infrastructure mode

WW529928 (see name plate on the bottom

of camera)

Supported format: IEEE 802.11 b/g/n

Frequency band: 2.4 GHz

Security: WEP/WPA-PSK/WPA2-PSK

Connection method:

Wi-Fi Protected Setup™ (WPS)/Manual

Access method: Infrastructure mode

Battery charger BC-QZ1/BC-QZ1 T

Rated input:

, 4.5 W

100 - 240 V

, 50/60 Hz, 0.38 A

Rated output: 8.4 V

, 1.6 A

Rechargeable battery pack

NP-FZ100

Rated voltage: 7.2 V

Design and specifications are subject to

change without notice.