Digitek G-Line Pro Manual de instruções de instalação - Página 12

Procurar online ou descarregar pdf Manual de instruções de instalação para Sistema de segurança Digitek G-Line Pro. Digitek G-Line Pro 14 páginas.

Imprimir página
The acoustic Arm/Dis-arm tone and siren panic feature can be switch off if requested by the end user.
NOTE: Factory setting is ON by default.
To enter alarm programing mode:
Arm and then dis-arm the alarm via the remote control or electronic key.
After pressing both buttons simultaneously (step 4), program the features according to your needs.
2.0 – Programmable Features
1
With the alarm disarmed, lift the seat or
2
3
4
While the LED is ON simultaneously
press the 2 buttons on the remote control.
Two beeps (a low and a high tone beep)
will confirm the system is in programming
TO ENABLE
Press button
1
Acoustic signals
Panic siren
www.digitek-moto.com
Rev05/KM/271113/DigProInst
G-Line 'Pro' Alarm
topcase.
Turn ignition key to "ON"
.
The LED will light up for approx. 1".
mode.The LED will light up steady.
TO
DISABL
E
Press button 2
Button 1: TO ENABLE
Button 2 TO
:
DISABLE
Button 1: TO ENABLE
Button
2:
TO
DISABLE
EXIT PROGRAMMING
12/14
System