Argo ACD 410 Manual de instruções - Página 13

Procurar online ou descarregar pdf Manual de instruções para Triturador de papel Argo ACD 410. Argo ACD 410 16 páginas.

CUTTER OILING INSTRUCTIONS

To ensure proper operation and function, periodic oiling of the cutting system is required.

Failure to oil your cutting system could result in reduced sheet capacity performance,

excess noise, paper jams and possibly machine failure. Oil your cutters every 5th or 6th

time you empty the basket, if excess squeaking and rubbing noise is coming from the

machine or if the shredders sheet capacity has diminished.

Squeeze the lubricant across the full width of the cutters. Insert paper

into sensor to activate the cutting system forward for 3 seconds. Then

press „R" to make shredder reverse for 3 seconds. Alternate between for-

ward and reverse at least three times or until all paper clears the cutters.

CAUTION:

lubricants to oil your cutting system. Use only a vegetable oil based lubricant in a

non-aerosol container with extension nozzle:

BASIC EXPLOITATION RULES

It is not advised to cut as many shreets as indicated as the maximum capacity of the

shredder. By exploiting the machine at it's top capacity we significantly reduce it's vitality.

Therefore, to maintain a durable and faultless work of the shredder, it is adviced to place

no more then 70% of the maximum amount of sheets to be shred at one time indicated

for each model by the producer. The maximum amount of sheet should be used only

occasionally.

It is forbidden to shred more sheets then the maximum amount of sheets to be shred

at one time indicated by the producer. It may cause the blockade of the machine and

massive engine overloading, which will diminish shredder's durability or even damage it.

Also you should not shred soft objects such as foil, paper towels, toilet paper or fabrics.

Nor paper with self-adhesive tape should be placed into the shredder. Those materials

wrap around and jam the knifes.

IMPORTANT RECOMMENDATIONS / WARNINGS

For your own safety please maintain particular care while installing and using the machine.

GENERAL

•

Keep hands, long hair, loose articles of clothing, jewellery and ties away from device

to avoid serious injury.

•

Unstable surfaces may cause the fall of the device, which can result in body injuries.

•

Please avoid fast stopping, use of additional force or surface unevenness while

transporting the device on trolley, casters or table.

•

Do not remove mechanical and electrical securities such as locks, covers or others.

It is forbidden to use objects not dedicated to do so or liquids.

Never use flammable synthetic oil, petroleum based or aerosol