Sony PlayStation Portable Manual de instruções - Página 9

Procurar online ou descarregar pdf Manual de instruções para Câmara digital Sony PlayStation Portable. Sony PlayStation Portable 40 páginas. Screen replacement guide
Também para Sony PlayStation Portable: Segurança e apoio (28 páginas), Referência rápida (33 páginas), Manual de instruções (24 páginas), Manual do utilizador (24 páginas), Manual de instruções (20 páginas), Manual de instruções (24 páginas), Manual de instruções (21 páginas), Manual de instruções (16 páginas), Reparação e peças (3 páginas), Manual de início rápido (15 páginas), Manual de Segurança (12 páginas), Manual de instruções (4 páginas), Referência rápida (34 páginas), Manual de instruções (2 páginas), Manual de instruções (2 páginas), Manual de Segurança (25 páginas)

Imprimir página

Sony PlayStation Portable Manual de instruções

Moisture condensation

If the PSP

system or Universal Media Disc is brought directly from

a cold location to a warm one, moisture may condense on the lens

inside the system or on the Universal Media Disc. Should this occur,

the system may not operate properly. In this case, remove the

Universal Media Disc and turn off and unplug the system. Do not

put the Universal Media Disc back in until the moisture evaporates

(this may take several hours). If the system still does not operate

properly, contact the appropriate PSP

which can be found within every PSP

Universal Media Disc handling

 Do not touch the opening on the rear of the disc (recorded surface

of the disc) with your fingers.

 Do not allow dust, sand, foreign objects or other types of dirt to

get on the disc.

 If the Universal Media Disc becomes dirty, gently wipe the

exterior and recorded surfaces of the Universal Media Disc using

a soft cloth. Do not use solvents or other chemicals.

 Do not use a Universal Media Disc that is cracked or warped or

has been repaired. The Universal Media Disc may break inside

the PSP

system, leading to injury or malfunction.

Handling and care of exterior surfaces

Follow the guidelines listed below to help avoid deterioration or

discolouration of the PSP

system.

 Do not use solvents or other chemicals to clean the exterior

surface.

 Do not allow the system to remain in direct contact with rubber or

vinyl products for an extended period of time.

customer service helpline

format software manual.

 Do not use a chemically-treated cleaning cloth to wipe off the

system.

Before using the analog stick

 Do not attempt to remove the analog stick from the system front,

as doing so will damage the system and may result in injury.

 For best results, go to

(Settings)

and then with the [System Information] screen displayed, rotate

the analog stick in a circular motion to adjust the analog stick's

range of movement.

Cleaning

For safety reasons, unplug the AC adaptor from the electrical outlet

and disconnect any other cables before cleaning the system.

Cleaning the exterior surface and LCD screen

Wipe gently with a soft cloth.

Cleaning the connectors

If the connectors on the PSP

system or on the USB cable become

dirty, signals may not be sent or received properly. Also, if the

connector on the headphones becomes dirty, you may experience

noise or interruptions in sound. Wipe the connectors with a dry, soft

cloth to keep in clean condition.

Cases and coverings

When placing the PSP

system in a commercially available case,

turn off the power or put the system in sleep mode. Do not use the

system while it is in the case. Leaving the system on, or using it

while in a case or covering may cause overheating or may damage

the system.

(System Settings),

Precautions