Sony Power HADFX HDC-P1 Manual de operação - Página 17
Procurar online ou descarregar pdf Manual de operação para Câmara digital Sony Power HADFX HDC-P1. Sony Power HADFX HDC-P1 36 páginas. Hd multi purpose camera
Também para Sony Power HADFX HDC-P1: Brochura (36 páginas), Brochura (4 páginas), Brochura (4 páginas), Brochura (2 páginas)
Imprimir página
Menu
Purpose
ALL
This menu permits you to control all items of the
OPERATION menu, PAINT menu,
MAINTENANCE menu, FILE menu, and
DIAGNOSIS menu as a single menu.
OPERATION
This menu contains items for camera operators
to operate the camera. It mainly permits switch
settings.
PAINT
This menu contains items for making detailed
image adjustments while using a waveform
monitor to monitor the waveforms output from the
camera. Support of a video engineer is usually
required to use this menu.
Although you can also use an external control
device to set the items on this menu, the menu is
effective when using the camera by itself
outdoors.
MAINTENANCE This menu contains items for performing camera
maintenance operations, such as changing the
system or setting infrequently used "paint" items.
FILE
This menu is for performing file operations, such
as writing or clearing the reference file.
DIAGNOSIS
This menu enables you to confirm the self-
diagnostic information.
To disable the "TOP" indication
Turn the power off then on again to disable the TOP selection.
Setting the Menu
To select a menu on the TOP MENU screen
Rotate the menu control knob to align the pointer with the
desired menu indication then push on the knob.
The CONTENTS page (page No. 00) or the last accessed
page of the selected menu is displayed.
To select a page from a CONTENTS page
Rotate the menu control knob to align the pointer (,) with the
desired page indication then push on the menu control knob.
If the screen can be scrolled, arrows will indicate
the direction for scrolling.
CONTENTS
01.<SW STATUS>
02.<VIDEO LEVEL>
03.<COLOR TEMP>
Pointer
04.<GAMMA>
05.<BLACK GAMMA>
06.<SATURATION>
07.<KNEE>
08.<WHITE CLIP>
09.<DETAIL 1>
10.<DETAIL 2>
The selected page is displayed.
<GAMMA>
[R] [G] [B] [M]
LEVEL
:
COARSE :
0.45
P00
TOP
Page number
P03 TOP
0
0
0
0
To change the displayed page
1
Check that the pointer is located at the left of the page
number then push on the menu control knob.
The pointer changes to a flashing question mark.
<GAMMA>
LEVEL
:
COARSE :
2
Rotate the menu control knob to flip through the
pages, and push on the knob when the desired page
is displayed.
The question mark will change back to the pointer, and
operations with the displayed page are enabled.
To return to the TOP MENU screen
Align the pointer with "TOP" at the top right of the menu
page then push on the menu control knob.
<GAMMA>
LEVEL
:
COARSE :
To set the Menu Items
If a question mark is flashing at the left of the page number,
push on the menu control knob to change it to the pointer (,).
Operation on the displayed page is enabled.
1
Align the pointer with the desired item, then push on
the menu control knob.
The pointer changes to a flashing question mark.
2
Rotate the menu control knob to change the setting
value.
When the knob is rotated quickly, the values will change
quickly; when rotated slowly, the values will change slowly.
To interrupt settings
Set the DISPLAY/MENU switch to OFF to turn off the
menu screen display.
The setting operation can be restarted by setting the
DISPLAY/MENU switch back to MENU.
3
Push on the menu control knob.
The question mark will change back to the pointer, and the
new setting will be registered.
4
To change other setting items on the same menu
page, repeat steps 1 through 3.
To specify a character string
When you press the menu control knob with the pointer
pointing to an item for which a character string, such as a file
ID, is to be specified, a cursor and the list of selectable
characters are displayed.
The displayed cursor can be moved by rotating the menu
control knob.
flash
? P03 TOP
[R] [G] [B] [M]
0
0
0
0
0.45
P03 TOP
[R] [G] [B] [M]
0
0
0
0
0.45
Menus
17