Sony SAL1870 - Zoom Lens - 18 mm Instruções de utilização

Procurar online ou descarregar pdf Instruções de utilização para Câmara digital Sony SAL1870 - Zoom Lens - 18 mm. Sony SAL1870 - Zoom Lens - 18 mm 2 páginas. Especificações
Também para Sony SAL1870 - Zoom Lens - 18 mm: Brochura e especificações (48 páginas), Instruções de utilização (2 páginas), Manual de seleção (19 páginas), Instruções de utilização (2 páginas), Manual de instruções e operação (2 páginas), Manual de instruções e operação (2 páginas), (Portuguese) Manual (4 páginas)

Imprimir página

Sony SAL1870 - Zoom Lens - 18 mm Instruções de utilização



4-178-769-01(1)

DT 18-70mm F3.5-5.6:

Lens for Digital Single Lens Reflex Camera/

Objectif pour appareil photo numérique

reflex à objectifs interchangeables/

/Operating Instructions/Mode d'emploi/Manual de

instrucciones/

DT 11-18mm F4.5-5.6

DT 18-70mm F3.5-5.6

DT 11-18mm F4.5-5.6:

DT 18-200mm F3.5-6.3

SAL1118/1870/18200



–1

(1)

(2)

Printed in Japan

–2





DT 18-70mm F3.5-5.6:

DT 11-18mm F4.5-5.6,

DT 18-200mm F3.5-6.3:







APS-C

35mm

* DT 11-18mm F4.5-5.6, DT 18-200mm F3.5-6.3



•

DT 18-200mm F3.5-6.3:

•



•

DT 18-70mm F3.5-5.6:

•

DT 11-18mm F4.5-5.6, DT 18-200mm F3.5-6.3:

•

• DT 11-18mm F4.5-5.6

•



•

DT 11-18mm F4.5-5.6



•

KK-CA

•

• DT 18-200mm F3.5-6.3

DT 11-18mm

F4.5-5.6

(SAL1118)

DT 18-70mm

F3.5-5.6

(SAL1870)

DT 18-200mm

F3.5-6.3

(SAL18200)

•

(



–



)

(1) (2) 2

(2)

(



–



)

35mm

( )

(mm)

(m)

(mm)

16.5-27

12-15

104 -76

0.25

0.125

F22-29

83 80.5

27-105

9-11

76 -23

0.38

0.25

F22-36

66 77

27-300

13-15

76 -8

0.45

0.27

F22-40

73 85.5

35mm

APS-C

ADI

(1)

English

Notes on use

This manual is for use with several different lenses.

• Do not leave the lens in direct sunlight. If sunlight is focused onto a nearby

This lens is designed for Sony

mount cameras (models equipped with

object, it may cause a fire. If circumstances necessitate leaving the lens in direct

APS-C sized image sensor). You cannot use on 35mm-format cameras.

sunlight, be sure to attach the lens cap.

• Be careful not to subject the lens to mechanical shock while attaching it.

WARNING

• Always place the lens caps on the lens when storing.

To reduce fire or shock hazard, do not expose the unit to rain or moisture.

• Do not keep the lens in a very humid place for a long period of time to prevent

Do not directly look at the sun through this lens.

mold.

Doing so might harm your eyes or cause loss of eyesight.

• After attaching the lens, do not carry the camera by holding the lens.

Keep the lens out of reach of small children.

• Do not touch the lens contacts. If dirt, etc., gets on the lens contacts, it may

interfere or prevent the sending and receiving of signals between the lens and the

There is danger of accident or injury.

camera, resulting in operational malfunction.

For the customers in the U.S.A.

Precautions for flash use

This device complies with Part 15 of the FCC Rules. Operation is subject to

• With certain of lens/flash combinations, the lens may partially block the light of

the following two conditions:

the flash, resulting in a shadow at the bottom of the picture. When using a built-

(1) This device may not cause harmful interference, and (2) this device must

in camera flash, make sure to remove the lens hood and shoot from at least 1m

accept any interference received, including interference that may cause

(3.3 feet) away from your subject.

undesired operation.

• The built-in flash cannot be used with DT 11-18mm F4.5-5.6. Use a separately

sold flash.

CAUTION

Vignetting

You are cautioned that any changes or modifications not expressly approved

• When you use lens, the corners of the screen become darker than the center. To

in this manual could void your authority to operate this equipment.

reduce this phenomena (called vignetting), close the aperture by 1 to 2 stops.

NOTE:

• With certain of lens/filter combinations, the frame of the filter may block the

incident radiation. This may significantly lower the light intensity when shooting

This equipment has been tested and found to comply with the limits for a

with the aperture wide open (low f-stop). Take test photographs at different

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

aperture settings for best results. (DT 11-18mm F4.5-5.6 only)

are designed to provide reasonable protection against harmful interference

Condensation

in a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the

If your lens is brought directly from a cold place to a warm place,

instructions, may cause harmful interference to radio communications.

condensation may appear on the lens. To avoid this, place the lens in a

plastic bag or something similar. When the air temperature inside the bag

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

reaches the surrounding temperature, take the lens out.

television reception, which can be determined by turning the equipment off

Cleaning the lens

and on, the user is encouraged to try to correct the interference by one or

• Do not touch the surface of the lens directly.

more of the following measures:

• If the lens gets dirty, brush off dust with a lens blower and wipe with a soft,

– Reorient or relocate the receiving antenna.

clean cloth (Cleaning Cloth KK-CA (optional) is recommended).

– Increase the separation between the equipment and receiver.

• Do not use any organic solvent, such as thinner or benzine, to clean the lens or

– Connect the equipment into an outlet on a circuit different from that to which the

the camera cone.

receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

For the customers in Canada

This Class B digital apparatus complies with Canadian ICES-003.

For the customers in Europe

Disposal of Old Electrical & Electronic Equipment

(Applicable in the European Union and other

European countries with separate collection

systems)

This symbol on the product or on its packaging indicates that

this product shall not be treated as household waste. Instead

it shall be handed over to the applicable collection point

for the recycling of electrical and electronic equipment. By

ensuring this product is disposed of correctly, you will help prevent potential

negative consequences for the environment and human health, which could

otherwise be caused by inappropriate waste handling of this product. The

recycling of materials will help to conserve natural resources. For more

detailed information about recycling of this product, please contact your

local Civic Office, your household waste disposal service or the shop where

you purchased the product.

Notice for the customers in the countries applying EU

Directives

The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-

ku Tokyo, 108-0075 Japan. The Authorized Representative for EMC and

product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327

Stuttgart, Germany. For any service or guarantee matters please refer to the

addresses given in separate service or guarantee documents.

Specifications

Name

35mm-format

(g)

(Model name)

focal length*

DT 11-18mm F4.5-

360

5.6 (SAL1118)

DT 18-70mm F3.5-

5.6 (SAL1870)

235

DT 18-200mm F3.5-

6.3 (SAL18200)

405

The values for equivalent 35mm-

Minimum focus is the shortest distance from the image sensor to the subject.

• This

• Depending on the lens mechanism,

Included items: Lens (1), Front lens cap (1), Rear lens cap (1), Lens hood (1), Set of printed documentation

Designs and specifications are subject to change without notice.

is a trademark of Sony Corporation.

 Names of parts

1...Zooming ring 2...Focal-length index 3...Lens contacts 4...Mounting

index 5...Focal-length scale 6...Focusing ring 7...Distance scale*

8...Distance index*

* DT 11-18mm F4.5-5.6, DT 18-200mm F3.5-6.3 only

 Attaching/detaching the lens

To attach the lens (See illustration –.)

Remove the rear and front lens caps and the camera body cap.

• You can attach/detach the front lens cap in two ways, (1) and (2). When

you attach/detach the lens cap with the lens hood attached, use method (2).

Align the orange index on the lens barrel with the orange

index on the camera (mounting index), then insert the lens

into the camera mount and rotate it clockwise until it locks.

• Do not press the lens release button on the camera when mounting the lens.

• Do not mount the lens at an angle.

To remove the lens (See illustration –.)

While pressing and holding the lens release button on the

camera, rotate the lens counterclockwise until it stops, then

detach the lens.

 Attaching lens hood

It is recommended that you use a lens hood to reduce flare and ensure

maximum image quality.

DT 18-70mm F3.5-5.6:

Fit the hood into the mount on the end of the lens barrel and

rotate the hood clockwise until it clicks.

DT 11-18mm F4.5-5.6, DT 18-200mm F3.5-6.3:

Align the red lines on the lens hood and the lens. Turn the hood

clockwise until the red line on the lens meets the red dot on the

hood and it clicks into place.

• When using a built-in camera flash, make sure to remove the lens hood to avoid

blockage of the flash light.

• If a marking (red line, red dot, etc.) is provided, attach the lens hood properly.

Otherwise, the lens hood may interfere with the desired effect or may appear in

pictures.

• When storing, turn over the lens hood and place it onto the lens backwards.

 Zooming

Rotate the zooming ring to the desired focal length.

 Focusing

When using the auto focus, the camera focuses the lens automatically. When

focusing manually, set your camera to the manual focus and rotate the

focusing ring while looking through the viewfinder. The focus signal in the

viewfinder indicates the current degree of the focus.

• The focusing ring can be rotated slightly past the infinity to provide accurate

focusing under various operating temperatures. Do not rotate the focusing ring

all the way to the end when focusing manually, even at infinity. Look through

the viewfinder and set the focus precisely.

• For Lens model DT 18-200mm F3.5-6.3, the focusing ring rotates the opposite

way than the other DT Zoom lenses.

Equivalent

Dimensions

Minimum

Maximum

Lens groups-

Angle of

Minimum

Filter diameter

(maximum

Mass

focus*

magnification

elements

view*

f-stop

(mm)

diameter × height)

(g (oz.))

(m (feet))

(X)

(mm)

(mm (in.))

Approx. 83×80.5

Approx. 360

16.5-27

12-15

104°-76°

0.25(0.8)

0.125

f/22-29

(3 3/8×3 1/4)

(12 11/16)

Approx. 66×77

Approx. 235

27-105

9-11

76°-23°

0.38(1.2)

0.25

f/22-36

(2 5/8×3 1/8)

(8 5/16)

Approx. 73×85.5

Approx. 405

27-300

13-15

76°-8°

0.45(1.5)

0.27

f/22-40

(2 7/8×3 3/8)

(14 5/16)