Cisco Aironet 340 Series Manual de início rápido - Página 7

Procurar online ou descarregar pdf Manual de início rápido para Hardware de rede Cisco Aironet 340 Series. Cisco Aironet 340 Series 12 páginas. Usb client adapter
Também para Cisco Aironet 340 Series: Manual de início rápido (12 páginas), Manual de início rápido (13 páginas), Notas de lançamento (14 páginas), Manual de início rápido (16 páginas), Manual de início rápido (12 páginas)

Follow these steps to install the utilities:

After you have installed the appropriate driver for your system, you can install the Cisco

Aironet Client Utilities (ACU), Link Status Meter (LSM), and Client Encryption Manager

(CEM) utilities. Installing utilities is optional unless using Wired Equivalent Privacy (WEP) in

your network. If WEP is enabled, all devices in the network must have the same WEP code,

which you set using the CEM utility. The ACU and LSM utilities provide troubleshooting and

status information, but are not required.

Insert the CD-ROM for your operating system into your computer CD-ROM drive.

Select Start > Run and enter the following path (where D is the letter for your CD-ROM

drive): D:\utils\setup.exe

Follow the setup instructions on the screen to complete the installation.

Refer to Software Conﬁguration Guide on the Client Adapter CD for instructions on how to

use each utility.

Note: After you have installed the appropriate driver and utilities, contact your IS department

if you have a problem connecting to the network.