DIGITEN WTC200 Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Termostato DIGITEN WTC200. DIGITEN WTC200 8 páginas.
Também para DIGITEN WTC200: Manual do utilizador (9 páginas), Manual do utilizador (12 páginas)

Imprimir página

heating operation starts, the relay outputs, the LCD displays

green light on the receiver turns on, when the CURRENT rises to the

STOP value, the heating operation stops, the LCD displays

green light on the receiver is off.

2. When the CURRENT temperature value is greater than the STOP value,

the heating operation stops, the LCD displays

receiver turns off, when the CURRENT temperature drops to the RUN

value, the heating work starts, the LCD displays

the receiver turns on.

High and low temperature alarm

1. Alarm is on

Long press SET button, then press the

you desire on the HIGH page, which the default value is

Long press SET button, then press the

you desire on the LOW page, which the default value is

2. Disable the alarm

Keep pressing the

alarm.

Keep pressing the

alarm.

Delay function

Damage can occur if the compressor restarted too soon after shutdown. This

feature forces the compressor to wait for a few minutes before restarting.

During the wait time, the display will flash

elapsed, the display stops flashing and the compressor turns on

How to set

1. Press and hold the SET button until the corresponding value flashes. At the

same time, the

button until the LCD displays

is displayed on the LCD. Press the

, the green light on the

, the green light on

button to set the High alarm value

button to set the Low alarm value

to turn off the High

to turn off the Low

, When the safe wait time has

, the

button to