Sony CMT HPZ7 Manual de Instruções - Página 35

Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Sony CMT HPZ7. Sony CMT HPZ7 40 páginas. Micro hi-fi component system
Também para Sony CMT HPZ7: Manual de Instruções (40 páginas), Manual de Instruções (40 páginas)

Imprimir página
Sony CMT HPZ7 Manual de Instruções
To save a tape permanently
To prevent a tape from being accidentally recorded
over, break off the cassette tab from side A or B as
illustrated.
Break off the
cassette tab
If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape.
Before placing a cassette in the tape
deck
Take up any slack in the tape. Otherwise, the tape may
get entangled in the parts of the tape deck and become
damaged.
When using a tape longer than
90 minutes
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding
frequently. The tape may get entangled in the tape
deck.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use.
Be sure to clean the tape heads before you start an
important recording or after playing an old tape.
Use a separately sold dry-type or wet-type cleaning
cassette. For details, refer to the instructions of the
cleaning cassette.
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape after every 20 to 30 hours of
use with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
cassette.
Downloaded From Disc-Player.com Sony Manuals

Specifications

Main unit (HCD-HPZ9/HCD-HPZ7)
Amplifier section
For the United States model
AUDIO POWER SPECIFICATIONS
HCD-HPZ9
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6-ohm loads, both channels driven, from
120 – 10,000 Hz: rated 85 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
HCD-HPZ7
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6-ohm loads, both channels driven, from
120 – 10,000 Hz: rated 50 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
HCD-HPZ9 for CMT-HPZ9
North American model:
Continuous RMS power output (reference):
Other models:
The following measured at AC 240 V, AC 220 V or AC
120 V
DIN power output (rated): 53 + 53 W
Continuous RMS power output (reference):
HCD-HPZ7 for CMT-HPZ7
North American model:
Continuous RMS power output (reference):
European model:
DIN power output (rated): 50 + 50 W (6 ohms at
85 + 85 W
(6 ohms at 1 kHz, 10%
THD)
(6 ohms at 1 kHz, DIN)
70 + 70 W
(6 ohms at 1 kHz, 10%
THD)
50 + 50 W
(6 ohms at 1 kHz, 10%
THD)
1 kHz, DIN)
continued
GB
35