Argo TULIP Manual de Instruções - Página 6
Procurar online ou descarregar pdf Manual de Instruções para Ventilador Argo TULIP. Argo TULIP 6 páginas. Table and stand fan
Connect the power cord to a suitable power socket (220-240 V~).
Do not use this fan in an area with high humidity, rich of dust or water.
Tilt adjustment: to regulate the air flow upward or downward, after switching off the units, push gently the motor housing
and adjust the angle of inclination.
ON/OFF operating TIMER :
ON - fan on
OFF - fan off
40-80-120: operation timer – the fan works respectively for 40-80-120 minutes (TULIP).
Fan speed regulation :
The buttons for
fan speed selection allows you to adjust the fan speed from the lowest (1) to the highest
0 button switches off the device.
Left/right swinging :
To activate / deactivate the swing, pull up or down on the lever on the engine, on the back of the unit.
ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE.
IMPORTANT: DO NOT SUBMERGE THE FAN IN WATER.
Cleaning the outside surface of the appliance
Turn the switch off and unplug before carrying out any maintenance work or moving the appliance.
Use a soft cloth to remove any dust from the fan.
If the fan is excessively dirty, use a soft cloth moistened with water and a mild detergent at a temperature lower than 50°C.
Let the fan dry completely before use.
Do not use corrosive detergents or solvents such as petrol. Do not wash the appliance with water.
chemical substances or other items to clean that may damage the surface.
Use a vacuum cleaner to remove dust from the air inlet/outlet grilles.
STORAGE
If the appliance is not used for prolonged periods, disconnect the power cord and store the appliance with this manual in
its original packaging, in a cool and dry place.
INFORMATION FOR THE CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EUROPEAN DIRECTIVE
2012/19/EU
This appliance may not be scrapped with domestic waste at the end of its life cycle. We call your attention to the crucial role
played by the consumer in the re-use, recycling and other forms of recovery of such waste.
The appliance must be scrapped by a sorted waste disposal centre or by returning it to the retailer (no charge is levied for
this service), when you purchase a new equivalent appliance.
Sorted disposal of electric and electronic equipment prevents the negative effects on the environment and human health
resulting from improper scrapping, and also allows the materials from which it is made to be recovered and recycled, with
significant savings in terms of energy and resources.
The sorted disposal requirement is indicated by the crossed waste bin label affixed to the appliance.
V 02/16
HOW TO USE THE APPLIANCE
MAINTENANCE AND STORAGE
www.argoclima.com
(3).
Do not use oils,
12