Cisco ASA 5506-X Manual de instalação - Página 45

Procurar online ou descarregar pdf Manual de instalação para Hardware de rede Cisco ASA 5506-X. Cisco ASA 5506-X 46 páginas. Threat defense reimage guide
Também para Cisco ASA 5506-X: Manual de início rápido (10 páginas), Manual de início rápido (14 páginas), Manual de configuração fácil (11 páginas), Manual do software (37 páginas), Montar e ligar (12 páginas), Montar o chassis (10 páginas), Manual de instalação do hardware (26 páginas)

Installation, Maintenance, and Upgrade

Figure 30: ASA Bracket Assembly

Step 1

Slide the rack-mount shelf containing the chassis out of the rack.

Step 2

At the back of the rack-mount shelf behind the power supplies, install the adjustable retainer.

a) Loosen the two top screws (item 1 in the figure above) slightly to adjust the bracket for each power supply.

The Delta power supply uses the bracket extended to its tallest configuration. This configuration has item 1 shifted

to the bottom of the slot on the bracket over the power supply. The LiteOn power supply uses the bracket extended

to its shortest configuration. This configuration has item 1 shifted to the top of the slot on the bracket over the power

supply.

b) Install the bracket over the power supply and screw the two bottom M3 captive screws (item 2 in the figure above)

on each side of the bottom of the bracket into the rack-mount tray.

The following figure shows the installed power supply retainer.

Online Only

Two screws to loosen to change from high to low

bracket

Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide

Install the Adjustable Power Supply Retainer

Two captive screws to attach to rack-mount tray