Argo L400A Manual de instruções - Página 6

Procurar online ou descarregar pdf Manual de instruções para Laminador Argo L400A. Argo L400A 10 páginas. Laminating machine with trimmer

Imprimir página

SAFETY INSTRUCTIONS

1.
Please, read manual carefuly.
2.
Make sure that electric cable does not interfere with usual office traffic.
3.
When removing the cover, be careful to avoid electric shock.
4.
Do not use machine when it is wet.
5.
Unplug power supply, when equipment is not in use.
6.
Do not cover ventilation duct when equipment is in use.
7.
Do not touch ventilation duct when the equipment is in use.
8.
Do not insert any objects into the ventilation duct.
9.
Before lamination please check if the plug or the electric cable are not damage.
10. Do not laminate close to flammable substances .
11. Do not use force during the process of lamination.
12. Documents with sharp edges and unproper thickness can damage rollers.
13. Warning! Documents may be very hot right after the proccess of lamination. Wait till
they cool off.
Read all instructions before using.
•
This product is not intended for use by children. Keep product out of the reach of
children.
•
This product is intended to be used in trimming paper. Do not use the product for any
other purposes.
•
Keep loose items (e.g., hands, fingers, jewelry, clothing, neckties, etc.) away from the
blade to avoid personal injury or damage to the product.
•
Watch the sharp edges.
To avoid damage to the product
•
Remove paper clips and staples from items before trimming paper.
•
Never lubricate the cutting blade.
•
Do not expose product to water or other liquids.
•
Always operate the product on a flat, level, steady surface to avoid it overturning.
•
Do not hang or wall-mount the product.
•
This product is intended for indoor use only. Do not use outdoors.
OPERATING INSTRUCTIONS
OFF (Trimmer):
HOT:
COLD:
RED LED:
© ARGO S.A.
EN
Trimmer function
Hot lamination
Cold lamination
Signalises that the power is well connected; if the HOT/COLD
switch is in HOT position, it means laminator is in pre-heating
process; if in COLD position, it means the laminator is ready to
laminate
6
www.argo.pl