Cisco ASA 5506W-X Manual de instalação - Página 13

Procurar online ou descarregar pdf Manual de instalação para Hardware de rede Cisco ASA 5506W-X. Cisco ASA 5506W-X 46 páginas. Threat defense reimage guide
Também para Cisco ASA 5506W-X: Manual de início rápido (10 páginas), Manual de configuração (13 páginas), Manual de início rápido (14 páginas), Manual de configuração fácil (11 páginas), Manual do software (37 páginas), Montar e ligar (12 páginas), Montar o chassis (10 páginas)

Cisco ASA 5506W-X Manual de instalação
Overview
3
Network Port Status
On the rear panel of the ASA 5506-X and ASA 5506W-X, a pair of LEDs (link status and connection status)
for each of the eight Gigabit Ethernet network ports, and the Gigabit Ethernet management port.
On the rear panel of the ASA 5506H-X, a pair of LEDs (link status and connection status) for each of the four
Gigabit Ethernet network ports, and the Gigabit Ethernet Management port.
Link status (L):
• Unlit—No link, or port is not in use.
• Green—Link established.
• Green, flashing—Link activity.
Connection-speed status (S):
• One blink every three seconds—10 Mbps.
• Two rapid blinks—100 Mbps.
• Three rapid blinks—1000 Mbps.

Network Ports

There are eight 10/100/1000 baseT Ethernet network ports on the ASA 5506-X and ASA 5506W-X. Each
RJ-45 (8P8C) copper port supports auto MDI/X as well as auto-negotiation for interface speed, duplex, and
other negotiated parameters, and are MDI/MDIX compliant.
Online Only
Active
Status of the failover pair:
• Green—Failover pair operating normally.
The LED is green always unless the ASA in
an HA pair.
• Amber—When the ASA is in an HA pair,
the LED is amber for the Standby unit.
• Unlit—Failover is not operational.
Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide
4
wLAN
Not in use on the ASA 5506-X or the ASA
5506-H.
Association status of the wireless connection on
the ASA 5506W-X:
• Green, blinking—Normal operating
condition, but no wireless client is present.
• Green—Normal operating condition, at least
one wireless client is associated.
• Amber, blinking—Software upgrade in
progress.
• Green, red, amber sequence—Discovery/join
process in progress.
• Red, blinking —Ethernet link not
operational.
• Unlit—Wireless is not operational.
Network Ports
9