Sony MHC-DX8 Manual de Instruções - Página 6

Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Sony MHC-DX8. Sony MHC-DX8 48 páginas.

Imprimir página

Step 1: Hooking up the system

(continued)

Set VOLTAGE SELECTOR to the

position of your local power line

voltage.

Set the same voltage range for the

satellite amplifier and main unit.

VOLTAGE

120V

Connect the power cord to a wall

outlet.

The demonstration appears in the

display. When you press ?/1, the

system turns on and the demonstration

automatically ends.

If the supplied adaptor on the plug does

not fit your wall outlet, detach it from

the plug (only for the model equipped

with an adaptor).

To disconnect the system

Make sure you disconnect the AC power cord

from the wall outlet before you disconnect

the system.

To connect optional components

See page 37.

To deactivate the demonstration

When you set the time (see "Step 3: Setting

the time"), the demonstration is deactivated.

To activate/deactivate the demonstration

again, press DISPLAY while the system is

off.

SELECTOR

230 - 240V

220V

To attach the front and satellite

speaker pads

Attach the supplied front and satellite

speaker pads to the bottom of the speakers to

stabilize the speakers and prevent them from

slipping.

Inserting two size AA (R6)

batteries into the remote

Tip

With normal use, the batteries should last for about

six months. When the remote no longer operates

the system, replace both batteries with new ones.

Note

If you do not use the remote for a long period of

time, remove the batteries to avoid possible damage

from battery leakage.

When carrying this system

Do the following to protect the CD

mechanism.

1 Make sure that all discs are removed from

the unit.

2 Hold down CD and then press ?/1 so that

"LOCK" appears in the display.

3 Unplug the AC power cord.