Sony MHC-EX660 Manual de Instruções - Página 24
Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Sony MHC-EX660. Sony MHC-EX660 28 páginas.
Imprimir página
USB device
DATA ERROR
You tried to play back a file that is not
playable.
DEVICE ERROR
The USB device could not be recognized
or an unknown device is connected.
DEVICE FULL
The memory of the USB device is full.
ERASE ERROR
Erase of the audio files or folders failed.
FATAL ERROR
The USB device was removed during
transferring or erase operation, and may
have been damaged.
FOLDER FULL
The number of folders has reached the
maximum.
FULL
You tried to program more than 25 steps.
NoDEVICE
No USB device is connected.
NO MEMORY
The memory selected for playback or
transfer has no memory media inserted in
the USB device.
NO STEP
All of the programmed steps have been
erased.
NO SUPPORT
An unsupported USB device is connected,
or the USB device is connected through
an USB hub.
NO TRACK
No playable file is loaded in the system.
NOT USED
You tried to perform a specific operation
under conditions where that operation is
prohibited.
OVER CURRENT
An over current from the
detected.
PROTECT
The USB device is write-protected.
24
GB
PUSH STOP
You tried to perform an operation that can
be performed only when the playback is
stopped.
READING
The system is reading information of the
USB device. Some buttons are not
available.
REC ERROR
Transferring did not start, stopped
partway, or otherwise could not be
performed.
REMOVED
The USB device has been removed.
TRACK FULL
The number of files has reached the
maximum.
Precautions
When carrying the unit
Perform the following procedure to
protect the disc mechanism.
Use the buttons on the unit to perform this
operation.
1
2
3
Notes on discs
• Before playing, wipe the disc with a cleaning
• Do not clean discs with solvents, such as
• Do not expose discs to direct sunlight or heat
port was
Remove the disc.
Press "/1 to turn off the system
and confirm that "STANDBY" stops
flashing.
Unplug the power cord.
cloth from the center outward to the edge.
benzine, thinner, or commercially available
cleaners or anti-static spray intended for vinyl
LPs.
sources such as hot air ducts, nor leave it in a
car parked in direct sunlight.