Sony MHC-GN660 Manual de Instruções - Página 29
Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Sony MHC-GN660. Sony MHC-GN660 48 páginas. Sony mhc-gn660 stereo system: user guide
Também para Sony MHC-GN660: Manual de Instruções (48 páginas)
Imprimir página
8
Press DIRECTION repeatedly on the
system to select "g" to record on one
side or "j" to record on both sides.
", press N repeatedly
If you select "
g
until "B" lights up in the display to select
front side as recording side. Press N
repeatedly until "b" lights up in the display
to select reverse side as recording side.
Press x.
9
Press ?/1 to turn off the system.
Other operations
To
Do this
1
Check the setting
Press CLOCK/TIMER
SELECT.
2
Press >+ or –.
repeatedly to select "REC
SELECT?", then press
ENTER.
Change the setting
Start from step 1.
1
Cancel the timer
Press CLOCK/TIMER
SELECT.
2
Press >+ or –.
repeatedly to select "TIMER
OFF?", then press ENTER.
Notes
• You cannot select the Play Timer and Timer
Recording at the same time.
• If you use the Timer Recording and the Sleep Timer
at the same time, the Sleep Timer has priority.
• The Timer Recording will not be activated if the
system is on.
• The volume is reduced to minimum during Timer
Recording.
• Do not operate the system from the time the system
turns on until the recording starts (about 15 seconds
before the preset time).
Tips
• The system turns on 15 seconds before the preset
time.
• When the Timer Recording is activated, "REC"
lights up in the display.
Display
Turning off the display
— Power Saving Mode
The demonstration display and the clock display
can be turned off to minimize the amount of
power consumed during standby mode (Power
Saving Mode).
Press DISPLAY repeatedly while the
system is turned off until the
demonstration display and the clock
display disappears in the display.
To cancel Power Saving Mode
Press DISPLAY repeatedly while the system is
turned off. Each time you press the button, the
display changes cyclically as follows:
1)
t Clock
Demonstration
(Power Saving Mode)
1)
The display changes and the indicators flashes even
when the system is turned off.
2)
"--.--" appears in the display if you have not set the
clock.
Note
You cannot do the following operations during Power
Saving Mode:
– Setting the clock (page 11)
– Changing the AM tuning interval (page 17)
– Turning on the system by pressing the function
buttons (CD, TAPE A/B, TUNER/BAND, GAME or
VIDEO/MD)
– Switching the VIDEO/MD function (page 34)
– Changing CD power management setting (page 17)
Tips
• The timer continues to operate in Power Saving
Mode.
?/1
•
indicator lights up even in the Power Saving
Mode.
2)
t No display
29
GB