Sony MHC-GN70V Manual de Instruções - Página 19

Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Sony MHC-GN70V. Sony MHC-GN70V 44 páginas.

Imprimir página

To improve tuner reception

When the tuner reception is poor, set the CD power

manage function to "CD POWER OFF". The default

setting is "CD POWER ON". Use buttons on the

system for the operation.

Press CD.

Press @/1 to turn off the system.

Press @/1 while holding down x.

"CD POWER OFF" appears.

To set CD power on

Repeat the procedure above.

Notes

• When "CD POWER OFF" is selected, the CD

access time is increased.

• You cannot change the setting in Power Saving

Mode.

To change the AM tuning interval

(Except Saudi Arabian models)

The factory settings for AM tuning interval is 9 kHz

(10 kHz in some areas). To change the AM tuning

interval, select any AM station first, then turn off the

power. While holding down the AMP MENU button,

turn the power back on. When you change the

interval, AM preset stations will be erased. To reset

the interval, repeat the same procedure. Use buttons

on the system for the operation.

Tips

• The preset stations are retained for half a day even

if you unplug the power cord or if a power failure

occurs.

• If you press TUNER/BAND while the power is off,

the power turns on automatically and TUNER is

selected as a function.

Listening to the radio

You can listen to a radio station either by

selecting a preset station, or by manually tuning

in the station.

Listening to a preset station

–– Preset Tuning

Before tuning to preset stations, be sure to

preset them (see "Presetting radio stations"

on page 18).

Press TUNER/BAND repeatedly to

select "FM" or "AM".

Press > or . (or PRESET

+ or – on the remote) repeatedly to tune

in the preset station you want.

Preset number

Tip

You can use the numeric buttons on the remote to

select a preset station. Press >10, then press numeric

buttons to enter the preset number over 10.

Listening to non-preset radio

station

— Manual Tuning

Press TUNER/BAND repeatedly to

select "FM" or "AM".

Press M or m (or TUNING + or – on

the remote) repeatedly to tune in the

station you want.

Tips

• To improve broadcast reception, adjust the supplied

antennas.

• When an FM stereo program has static noise, press

FM MODE repeatedly until "MONO" appears.

There will be no stereo effect, but the reception will

improve.

• Press and hold M or m (or TUNING + or – on

the remote). The frequency indication changes and

scanning stops when the system tunes in a station

(Automatic Tuning).

• To record from the radio, see "Recording to a tape"

on page 21 or "Timer Recording radio programs"

on page 22.

MHC-GN70 4-246-556-11 (3)

Frequency

MHz