Sony MHC-RG222 Manual de Instruções - Página 38
Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Sony MHC-RG222. Sony MHC-RG222 47 páginas. Sony operating instructions owner's record mini hi-fi component system mhc-gx750, gx450, gx250, mhc-rg555, rg551s, rg444s, rg441, rg333, rg222, rg221, rg121, rg100, mhc-rx550
Também para Sony MHC-RG222: Manual de Instruções (48 páginas)
Imprimir página
Cleaning
the
cabinet
Clean the cabinet
panel and controls with a soft cloth
slightly moistened
with mild detelgent
solution. Do not
use any _,pe of abrasive pad, scorning
powder
or
solvent
such as thiimer, benzine
or alcohol.
To
save
a tape
permanently
To prevent
a tape from being accidentally
recorded
over, break off the cassette
tab flora side A or B as
illustrated.
2
_'_''''"
_ cBaresaektt2tt22
If you later want to reuse the tape tbr recording,
cover
the broken
tab with adhesive
tape.
Before
placing
a cassette
in
the
tape
deck
Take up any slack in the tape. Othe_vise
the tape may
get entangled
in the pmls of the tape deck and become
damaged.
When
using
a tape
longer
than
90
minutes
The tape is very elastic. Do not change
the tape
operations
such as play, stop, and fast-winding
frequently.
The tape may get entangled
in the tape
deck.
Cleaning
the
tape
heads
Clean the tape heads afte! eve_5" 10 hours of use. Be
sure to clean the tape heads before you start an
important
recording
or after playing
an old tape. Use a
separately
sold @-type
or wet-_,pe
cleaning
cassette.
For details,
refer to the instructions
of tile cleaning
cassette.
Demagnetizing
the
tape
heads
Demagnetize
the tape heads and the metal parts that
have contact with tile tape after eve1), 20 to 30 hours of
use with a separately
sold demagnetizing
cassette.
For
details, refe! to the instructions
of the demagnetizing
cassette.
Main
unit
Amplifier
section
AUDIO
POWER
SPECIFICATIONS
( M HC-GX750/GX450/G×250/R×550
USA
models
only)
MHC-GX750/RX550
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6 ohm loads, both channels
driven, from
120
10,000 Hz: rated 160 watts per channel
mininmm
RMS power, with no more than 10%
total harmonic
distortion
from 250 mi!liwatts
to
rated output.
MHC-GX450
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6 ohm loads, both channels
driven, from
120
10,000 Hz: rated 125 watts per channel
mininmm
RMS power, with no more than 10%
total harmonic
distortion
from 250 mi!liwatts
to
rated output.
MHC-GX250
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6 ohm loads, both channels
driven, from
120
10,000 Hz: rated 140 watts per channel
mininmm
RMS power, with no more than 10%
total harmonic
distortion
from 250 mi!liwatts
to
rated output.
North
American
models:
MHC-GX750/RX550
F!ont speaker
Continuous
RMS power output (refelence):
160 + 160 watts (6 olnns at
1 kHz, 10% THD)
Total harmonic
distortion
less than 0.07%
(6 ohlns at
1 kHz, 80 W)
Sub woofer
Contim_ous
RMS power output (refelence):
180 watts (6 ohms at
50 Hz, 10% THD)
Total harmonic
distortion
less than 0.07%
(6 olnns at
50 Hz, 90 W)
38 Gs