Sony MHC-RG575S Manual de Instruções - Página 30
Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Sony MHC-RG575S. Sony MHC-RG575S 45 páginas. Sony operating instructions owner's record mini hi-fi component system mhc-gx555, gx355, gx255, mhc-rg575s, rg475s, rg470, rg270, rg170
Também para Sony MHC-RG575S: Manual de Instruções (44 páginas)
Imprimir página
The album
name, track title
and ID3 tag
information
do not appear
correctly.
• Use a db, c that conforms
x_ith 1SO9660 Lcxel 1,
Level 2 or Joliet in Ihe expansion
format.
• The disc ID3 tag is not ver. I nor ver. 2.
• Only up to 30 characters
of ID3 tags are displayed.
• The characters
that can be displayed
by this
system arc as l_)llows:
Upper cases IA to Z)
Numbers
(0 to 9)
Symbols
I'< > "-+,
/ @ [ \ ] )
Other characters
may not be displayed
correctly.
Tuner
Severe
hum or noise/stations
cannot
be
received.
("TUNED"
or "STEREO"
flashes
in
the display.)
• Set the proper band and frequency
(page
14).
• Connect
the antenna
properly
(page 7).
• Find a place and an orientation
that provide good
reception,
then set up the mtenna
agfin. If you
cannot
obtain
good
reception,
_e
reconln/end
yo/i
connect
a commercially
available
external
ilntenniL
• The supplied
FM lead antenna
receives
signals
along its entire length,
so make sure you extend it
fully.
• Locate the antennas
as far away from the speaker
cords as possible.
• Try turning
off surrounding
electrical
equipment
• Set "CD POWER
OFF" by CD power manage
function (page
15).
A stereo FM program
cannot
be received
in
stereo.
• Press FM MODE
rq_eatedly
until "STEREO'
ap?ears.
Noise increases
or the high frequencies
are
erased.
• The rccord/playback
heads ire magnetized
Demagnetize
them (page 33).
The tape does not record.
• No cassette
is loaded
Load a cassette
• Tile tab has been removed
from tile cassette
Cover the broken
tab with adhesive
tape
(page 33)
• The tape has wound to the end
If the system
still does not
operate
properly
after
performing
the
above
measures,
reset
the
system
as
follows:
Use buttons
on the unit for the operation
1
Disconnect
the power
cord.
2 Reconnect
the power
cord.
3 Press
I/_
to turn
on the system.
4 Press
i,
ILLUMINATION
and DISC
1 atthe
same
time.
The
system
is reset
to the Mctory
settings
You
should
set the settings
you made.
such as the
preset
stations,
clock,
and
timer
Note
You cannot rescl the system to the factory settings
in
Power Saving
Mode (page 24)
Tape
deck
The tape does not record
or play, or there
is a
decrease
in sound level.
• The heads arc dirty
Clean them (page 33)
• The record/playback
heads arc magnetized
Demagnetize
them (page 33).
The tape
does not erase
completely.
• The record/playback
heads arc m:,gnctized.
Demagnetize
them (page 33).
There is excessive
wow or flutter,
or the sound
drops
out.
• The capstans
or pinch rollers are dirty Clean them
(page 33).
30 G8