Sony MHC-RV22 Manual de Instruções - Página 38

Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Sony MHC-RV22. Sony MHC-RV22 48 páginas.

Imprimir página

The timer does not function.

• Check the timer setting and set the correct time

(pages 29 and 30).

• Cancel the Sleep Timer Function (page 28).

The remote does not function.

• Remove the obstacle.

• Move the remote closer to the system.

• Point the remote at the system's sensor.

• Replace the batteries (R6/size AA).

• Locate the system away from the fluorescent light.

There is acoustic feedback.

• Reduce the volume.

• Move the microphone away from the speakers or

change the direction of the microphone.

The color irregularity on a TV screen persists.

• Turn off the TV set once, then turn it on after 15

to 30 minutes. If the color irregularity still

persists, place the speakers farther away from the

TV set.

The sound from the connected source is

distorted (MHC-RV555/RV55 only).

• If "VIDEO" appears in the display when you press

VIDEO/SAT on the unit, switch the display to

"SAT" (see "Listening to audio from a connected

component (MHC-RV555/RV55 only)" on

page 35).

VIDEO CD/CD/MP3 player

The disc tray does not open and "LOCKED"

appears.

• Contact your Sony dealer or local authorized Sony

service facility.

The disc tray does not close.

• Place the disc correctly.

• Always close the tray by pressing Z on the unit.

Trying to press the tray closed with your fingers

may cause problems with the player.

The disc does not eject.

• You cannot eject the disc during CD Synchro

Recording. Press x to cancel the CD Synchro

Recording, then press Z on the unit to eject the

disc.

• Consult your nearest Sony dealer.

There is no picture.

• Check that the player is connected securely.

• Make sure you operate the TV correctly.

• Make sure you set the color system correctly,

according to your TV (color) system.

• Press CD.

• Make sure that Game Mixing is canceled.

Play does not start.

• Open the disc tray and check whether a disc is

loaded.

• Wipe the disc clean (page 42).

• Replace the disc.

• Place the disc that this system can play (page 5).

• Place the disc correctly.

• Place the disc in the tray with the label side up.

• Remove the disc and wipe away the moisture on

the disc, then leave the system turned on for a few

hours until the moisture evaporates.

• Press N to start play.

Disc access takes a long time.

• Set "CD POWER ON" by CD power manage

function (page 19).

The sound skips.

• Wipe the disc clean (page 42).

• Replace the disc.

• Try moving the system to a place without

vibration (e.g., on top of a stable stand).

• Try moving the speakers away from the system, or

placing them on separate stands. When you listen

to a track with bass sounds at high volume, the

speaker vibration may cause the sound to skip.

Play does not start from the first track.

• Press PLAY MODE repeatedly until both "PGM"

and "SHUF" disappear to return to Normal Play.

MP3 audio track cannot be played back.

• Recording was not performed according to the

ISO9660 level 1 or level 2 format or Joliet in the

expansion format.

• The MP3 audio track does not have the extension

".MP3".

• The data is not stored in MP3 format.

• Discs containing files other than MPEG 1 Audio

Layer-3 files cannot be played.

• Files that are too small (64 kB or less) cannot be

played back.