Sony RCD-W2000ES - Cd/cdr Recorder Manual de Instruções - Página 32
Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Sony RCD-W2000ES - Cd/cdr Recorder. Sony RCD-W2000ES - Cd/cdr Recorder 44 páginas. Limited warranty (es products)
Também para Sony RCD-W2000ES - Cd/cdr Recorder: Garantia limitada (1 páginas)
Imprimir página
Erasing Tracks of a CD-
RW
You can erase tracks recorded on a CD-RW.
This process starts with the last track on the
disc.
Before erasing the track, make sure that the
disc is not finalized. If the disc is finalized,
follow the instructions for "Unfinalizing a CD-
RW" (page 31).
When using the remote, set DECK A/DECK B
to DECK B.
DECK A/DECK B
./>
1
Place a CD-RW that has not been
finalized in DECK B.
Make sure that "TOC" appears in the
display. If a finalized CD is loaded, "TOC"
does not appear.
2
Press ERASE on the remote while the
unit is stopped.
"Tr Erase?" appears in the display.
3
Press YES.
The last track is selected.
To erase only the last track, go to step 5.
32
MENU/NO
YES
N
AMS
ERASE
4
Turn AMS (or press ./> on the
remote) to select the first track you
want to erase.
5
Press N (or H on the remote) or YES.
Erasing starts from the last track. During
erasing, "Tr Erase" appears in the display
and the remaining time for erasing the last
track (may not be accurate) appears. When
this process is finished, the total track
number and the total playing time appears
in the display.
Tip
You can erase tracks using the menu.
1 Select "Tr Erase" from the menu (page 36).
To erase only the last track, go to step 3.
2 Turn AMS (or press ./> on the remote) to
select the first track you want to erase.
3 Press N (or H on the remote) or YES.
Erasing starts.
To erase all tracks
1
Place a CD-RW that has not been
finalized in DECK B.
2
Press ERASE on the remote repeatedly
until "DiscErase?" appears in the
YES
display while the unit is stopped.
3
Press N (or H on the remote) or YES.
Erasing starts. During erasing, "DiscErase"
appears in the display and the remaining
H
time of erasing (may not be accurate)
appears. When the entire disc is erased,
"Blank Disc" appears.
Tip
You can erase all tracks using the menu.
1 Select "DiscErase?" from the menu, then press N
(or H on the remote) or YES.
2 "DiscErase??" appears.
3 Press N (or H on the remote) or YES again.
Erasing starts.
Notes
• Once the erasing process has started, you cannot
stop in the middle of the process.
• You can erase only from the last track.
• Do not turn off the unit or disconnect the unit from
the power source in the middle of the erasing
process.
• You cannot erase tracks while playing a disc on
DECK A.