Sony SCD-XA9000ES - Es Super Audio Cd Player Manual de Instruções - Página 27

Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Sony SCD-XA9000ES - Es Super Audio Cd Player. Sony SCD-XA9000ES - Es Super Audio Cd Player 34 páginas. Super audio cd player
Também para Sony SCD-XA9000ES - Es Super Audio Cd Player: Garantia limitada (1 páginas), Especificações (2 páginas)

Imprimir página
Sony SCD-XA9000ES - Es Super Audio Cd Player Manual de Instruções
7
Press . AMS >.
The balance adjustment display appears.
In stop mode, the test tone is output from the selected
speaker.
Example: When you select "SURR BALANCE"
during stop mode, the test tone is output
from the front speakers and surround
speakers.
DISC
F R T : _ _ _ _ _ : S U R R
8
Turn . AMS > to adjust the output level.
DISC
F R T : _ _ _ _ _ : S U R R
9
Press . AMS >.
The player status returns to Step 6.
Repeat Step 6 through 9 for more adjustments.
10
Press MENU after you finish adjusting.
The display returns to the normal display.
Adjusting the output level from the remote Z
You can adjust the output level of each speaker from the
listening position by using the supplied remote.
1
Press LEVEL ADJ during playback or stop mode.
During playback, go to Step 4.
2
Press ./> repeatedly until "TONE ON"
appears in the display.
3
Press ENTER.
The test tone issues from the speakers in sequence
with the speaker type appearing in the display.
4
Press ./> repeatedly until the desired item
appears in the display.
Select the item from "CNTR BALANCE," "SURR
BALANCE," or "SW BALANCE."
Note
When you set the Sub woofer to "––" in the Multi-channel
playback mode (page 25), "SW BALANCE" does not appear.
Similarly, "CNTR BALANCE" or "SURR BALANCE" does
not appear when you set the corresponding speaker to "––."
5
Press ENTER.
The balance adjustment display appears.
In stop mode, the test tone is output from the selected
speaker.
Example: When you select "SURR BALANCE"
MULTI
CH
S A C D
1 2 3 4 5
6 7 8 9 10
F R T : _ _ _ _ _ : S U R R
6
Press ./> repeatedly to adjust the output
level.
MULTI
CH
S A C D
1 2 3 4 5
6 7 8 9 10
F R T : _ _ _ _ _ : S U R R
7
Press ENTER.
The player status returns to Step 4.
Repeat Step 4 through 7 for more adjustments.
8
Press LEVEL ADJ after you finish adjusting.
The display returns to the normal display.
Note
If you select a playback mode other than "2CH Direct" or "MCH
Direct" using the Multi-channel management function, the sound
distribution to the speakers will change, possibly causing a
decrease in overall sound volume. If this occurs, adjust the
volume with the volume control on the connected amplifier.
during stop mode, the test tone is output
from the front speakers and surround
speakers.
DISC
DISC
MULTI
CH
S A C D
1 2 3 4 5
6 7 8 9 10
MULTI
CH
S A C D
1 2 3 4 5
6 7 8 9 10
27
US