Sony SHAKE-7 Manual de Instruções - Página 37

Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Sony SHAKE-7. Sony SHAKE-7 44 páginas. Mini hifi component system

Imprimir página

• If there are obstacles between the

system and your Bluetooth device,

remove or avoid the obstacles.

• If there is equipment that generates

electromagnetic radiation, such as a

wireless LAN, other Bluetooth device,

or a microwave oven nearby, move

them away.

The sound of your Bluetooth device

cannot be heard on this system.

• Increase the volume on your Bluetooth

device first, and then adjust the volume

using VOLUME +/–.

There is severe hum, noise or

distorted sound.

• If there are obstacles between the

system and your Bluetooth device,

remove or avoid the obstacles.

• If there is equipment that generates

electromagnetic radiation, such as a

wireless LAN, other Bluetooth device,

or a microwave oven nearby, move

them away.

• Turn down the volume of the connected

Bluetooth device.

To reset the system

If the system still does not operate

properly, reset the system to factory

default settings.

Use the buttons on the unit to perform this

operation.

Unplug and plug the power cord

back in.

Press "/1 to turn on the system.

Hold down x and LED COLOR at

the same time for about 3 seconds.

"RESET" appears in the display panel.

All user-configured settings, such as

preset radio stations, timer, and the

clock are reset to factory default

setting.

Messages

Disc/Timer

NO DISC

There is no disc on the disc tray or you

have loaded a disc that cannot be played

back on this system.

NO STEP

All of the programmed steps have been

erased.

NOT IN USE

You tried to perform a specific operation

under conditions where that operation is

prohibited.

OFF TIME NG

The Play Timer or Recording Timer start

time and stop time is the same.

PUSH SELECT

You tried to set the clock or timer during

timer operation.

PUSH STOP

You tried to perform an operation that can

be performed only when the playback is

stopped.

READING

The system is reading information of the

disc or USB device. Some operations are

not available.

STEP FULL

You tried to program more than 25 steps.

UNLOCK

The disc theft-preventive function is

released.

USB device

DEVICE FULL

The memory of the USB device is full.

FATAL ERROR

The USB device was removed during

transfer or erase operation, and may have

been damaged.