Sony SS-SHAKE99 Manual de Instruções - Página 43

Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Sony SS-SHAKE99. Sony SS-SHAKE99 48 páginas. Home audio system

Imprimir página

On placement

• Do not place the system in an inclined

position or in locations that are extremely hot,

cold, dusty, dirty, or humid or lacking

adequate ventilation, or subject to vibration,

direct sunlight or a bright light.

• Be careful when placing the unit or speakers

on surfaces that have been specially treated

(for example, wax, oil, polish) as staining or

discoloration of the surface may result.

• If the system is brought directly from a cold to

a warm location or is placed in a very damp

room, moisture may condense on the lens

inside the unit, and cause the system to

malfunction. In this situation, remove the

disc, and leave the system turned on for about

an hour until the moisture evaporates.

On heat buildup

• Heat buildup on the unit during operation is

normal and is not a cause for alarm.

• Do not touch the cabinet if it has been used

continuously at a high volume because the

cabinet may have become hot.

• Do not obstruct the ventilation holes.

On the speaker system

This speaker system is not magnetically

shielded, and the picture on nearby TV sets may

become magnetically distorted. In this situation,

turn off the TV, wait 15 to 30 minutes, and turn

it back on. If there is no improvement, move the

speakers far away from the TV.

Cleaning the cabinet

Clean this system with a soft cloth slightly

moistened with a mild detergent solution.

Do not use any type of abrasive pad, scouring

powder, or solvent, such as thinner, benzine,

or alcohol.

On Bluetooth Communication

• Bluetooth devices should be used within

approximately 10 meters (33 feet)

(unobstructed distance) of each other. The

effective communication range may become

shorter under the following conditions.

– When a person, metal object, wall or other

obstruction is between the devices with a

Bluetooth connection

– Locations where a wireless LAN is installed

– Around microwave ovens that are in use

– Locations where other electromagnetic

waves occur

• Bluetooth devices and wireless LAN

(IEEE 802.11b/g) use the same frequency

band (2.4 GHz). When using your Bluetooth

device near a device with wireless LAN

capability, electromagnetic interference may

occur. This could result in lower data transfer

rates, noise, or inability to connect. If this

happens, try the following remedies:

– Try connecting this system and Bluetooth

device when you are at least 10 meters

(33 feet) away from the wireless LAN

equipment.

– Turn off the power to the wireless LAN

equipment when using your Bluetooth

device within 10 meters (33 feet).

• The radio waves broadcast by this system may

interfere with the operation of some medical

devices. Since this interference may result in

malfunction, always turn off the power on this

system and Bluetooth device in the following

locations:

– In hospitals, on trains, in airplanes, at gas

stations, and any place where flammable

gases may be present

– Near automatic doors or fire alarms

• This system supports security functions that

comply with the Bluetooth specification as a

means of ensuring security during

communication using Bluetooth technology.

However, this security may be insufficient

depending on the setting contents and other

factors, so always be careful when performing

communication using Bluetooth technology.

• Sony cannot be held liable in any way for

damages or other loss resulting from

information leaks during communication

using Bluetooth technology.

• Bluetooth communication is not necessarily

guaranteed with all Bluetooth devices that

have the same profile as this system.

• Bluetooth devices connected with this system

must comply with the Bluetooth specification

prescribed by the Bluetooth SIG, Inc., and

must be certified to comply. However, even

when a device complies with the Bluetooth

specification, there may be cases where the

characteristics or specifications of the

Bluetooth device make it impossible to

connect, or may result in different control

methods, display or operation.

• Noise may occur or the audio may cut off

depending on the Bluetooth device connected

with this system, the communications

environment, or surrounding conditions.