Sony SS-WG60 Manual de Instruções - Página 13

Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Sony SS-WG60. Sony SS-WG60 41 páginas.

Imprimir página
The disc number*
at the loading
posttton
appears
tn the display.
As you turn
DISC
ACCESS,
the disc number
or Disc Memo
changes.
1: If you have already loaded discs, the disc
number at the playmg posttton appears. When
you turn DISC ACCESS,
the displayed
disc
number changes to the one at the loading
positton.
Disc number
Total number of track:
and total playtng time
3
;;;;t
a disc
with
the label
side
facmg
Notes
l
Make sure you have loaded the disc mto each
slot at a rtght angle to the rotary table. If the
disc IS not put m stratght, tt may damage the
mm or the disc.
l
Make sure the rotary table comes to a complete
stop before loading or removmg
discs.
With the label
4
Repeat
steps
2 and 3 to load
additional
discs.
5
Close
the front
cover
by pushing
the
right
edge
of the cover
until
it clicks.
The rotary
table turns
and the disc slot at the
8
loading
posttton
1s set to the playing
s
position.
0
Removing
CDs
After
followtng
step 1 of "Loading
a CD"
on
page 12, remove
the discs.
Then close the front
cover.
Notes
* Always
close the front cover except when you load
or remove discs.
l
Do not load an empty 8 cm CD adaptor. It may
damage the mm.
l
Do not attach anythmg such as seals or sleeves to
CDs. It may damage the mut or the disc.
l
If you drop a disc mto the nmt and the CD will not
go mto the slot correctly,
consult your nearest Sony
dealer.
l
When transportmg
the mm, remove all discs from
the mm.
l
If you want to remove the disc played,
open the front co\cr.
The disc
comes to the loading posttton.
Remove the disc
after the rotary table comes to a complete stop.
Tip
You can display the ongmal Disc Memos Instead of
the disc numbers (see "Labeling
a CD' on page 16) to
locate the disc easily when you start playmg.
When you select a CD-TEXT
disc, the disc tttle ts
displayed
Instead of the disc number.
13