Sony SS-ZX8 Manual de Instruções - Página 17

Procurar online ou descarregar pdf Manual de Instruções para Sistema estéreo Sony SS-ZX8. Sony SS-ZX8 48 páginas. Sony operating instructions compact hi-fi stereo system fst-zx8, fst-zx6, lbt-zx8, lbt-zx6

Imprimir página

To improve tuner reception

When the tuner reception is poor, set the CD

power manage function to "CD POWER OFF".

The default setting is "CD POWER ON".

Use buttons on the system for the operation.

Press FUNCTION repeatedly until "CD"

appears in the display.

Press ?/1 to turn off the system.

Press ?/1 while holding down x (CD). The

system turns on automatically.

"CD POWER OFF" appears in the display.

To set CD power on

Repeat the procedure above and "CD POWER

ON" appears in the display.

Notes

• When "CD POWER OFF" is selected, disc access

time is increased.

• You cannot change the CD power manage setting in

Power Saving Mode (page 29).

To change the AM tuning interval

The factory settings for AM tuning interval is

9 kHz (or 10 kHz for some areas). To change the

AM tuning interval, select any AM station first,

then turn off the system. While holding down

TUNER ENTER, press ?/1 to turn on the

system again. "AM 10k STEP" or "AM 9k

STEP" appears in the display. When you change

the interval, AM preset stations will be erased.

To reset the interval, repeat the same procedure.

Use buttons on the system for the operation.

Note

You cannot change the AM tuning interval in the

Power Saving Mode (page 29).

Tips

• The preset stations are retained for half a day even if

you unplug the power cord or if a power failure

occurs.

• If you press TUNER/BAND while the system is

turned off, the system turns on automatically and

"TUNER" is selected as the function.

• You can also press FUNCTION repeatedly to select

"TUNER".

Listening to the radio

You can listen to a radio station either by

selecting a preset station, or by manually tuning

in the station.

Listening to a preset station

— Preset Tuning

Before tuning to preset stations, be sure to preset

them first (see "Presetting radio stations" on

page 16).

Press TUNER/BAND repeatedly to

select "FM" or "AM".

Press TUNING MODE repeatedly until

"PRESET" lights up in the display.

Press TUNING +/– (or >+ or –. on

the remote) repeatedly to select the

preset station you want.

Listening to non-preset radio

station

— Manual Tuning

Press TUNER/BAND repeatedly to

select "FM" or "AM".

Press TUNING MODE repeatedly until

"MANUAL" lights up in the display.

Press TUNING +/– (or >+ or –. on

the remote) repeatedly to tune in the

station you want.

Tips

• To improve broadcast reception, adjust the supplied

antennas, or connect an external antenna.

• When an FM stereo program has static noise, press

FM MODE repeatedly until "MONO" lights up in

the display. There will be no stereo effect, but the

reception will improve.

• To record from the radio programs, see "Manual

Recording" (page 20).