Sony XDR-DS21BT Instruções de utilização - Página 2
Procurar online ou descarregar pdf Instruções de utilização para Sistema estéreo Sony XDR-DS21BT. Sony XDR-DS21BT 2 páginas.
Imprimir páginaÔ Useful Functions
ˎ
2
Press
ALARM TIME SET +/–
to select the following setting
A
to confirm.
items, then press
Each time you press ALARM TIME SET +/– , the currently selected item
Using Hands-free Calling While Listening
begins to flash.
Once you confirm the setting by pressing A , the following setting item
to Music
begins to flash.
ˎ Hour, minute: Press and hold ALARM TIME SET +/– to change the hour
ˎ
and minute digits quickly.
You can enjoy hands-free calling via BLUETOOTH connection with a BLUETOOTH
ˎ Days of the week: Select one of the following three types.
ˎ
mobile phone that has a music function and supports the BLUETOOTH profile
Every day: "MON TUE WED THU FRI SAT SUN"
A2DP (Advanced Audio Distribution Profile), and HFP (Hands-free Profile) or HSP
Week day: "MON TUE WED THU FRI"
(Headset Profile).
Weekend: "SAT SUN"
If your BLUETOOTH mobile phone supports both HFP and HSP, set to HFP.
3
Press
ALARM TIME SET +/–
to select the alarm mode, then
A
to confirm.
press
Select one of the following.
ˎ "DAB," "FM": Set the radio alarm. Proceed to step 4.
ˎ
ˎ "USB": Set the alarm to sound from an iPhone/iPod via USB connection.
ˎ
Skip step 4, and proceed to step 5.
ˎ "BLUETOOTH": Set the alarm to sound from a BLUETOOTH device, such as
ˎ
smartphone, iPod, etc., via BLUETOOTH connection. Skip step 4, and proceed
to step 5.
ˎ "BUZZER": Set the buzzer alarm. The alarm setting is completed. The
ˎ
display returns to clock and "" lights up in the display. You do not need to
do step 4 or later.
4
Press
ALARM TIME SET +/–
to select the radio station,
then press A to confirm.
Select the desired preset number or "- -." "- -" is the last station you listened
to.
5
Press
ALARM TIME SET +/–
to adjust the volume, then
Operations may vary depending on the BLUETOOTH mobile phone. Refer also to
the operating instructions supplied with your mobile phone.
A
press
to confirm.
1
Make the BLUETOOTH connection between the system and
The alarm setting is completed. The display returns to clock and "" lights up
in the display.
the mobile phone.
6
For details on the BLUETOOTH connection procedure, see "How to Make
When "USB" or "BLUETOOTH" is selected as the alarm
Wireless Connection with BLUETOOTH Devices." The BLUETOOTH connection is
mode, connect an iPhone/iPod via USB or a BLUETOOTH
established and " (BLUETOOTH)" in the display stays on.
device before the alarm sounds.
2
Start playback on the BLUETOOTH mobile phone, then
If the system does not connect to the BLUETOOTH device, at the alarm time,
adjust the volume.
the system tries to establish BLUETOOTH connection with the BLUETOOTH
device connected to the system last time.
Set the volume of the BLUETOOTH mobile phone to a moderate level, and
If the system cannot connect to the BLUETOOTH device, or does not connect
press VOLUME –/+ on the system.
to an iPhone/iPod via USB, the alarm will be the buzzer.
When the BLUETOOTH device is connected to the system (" (BLUETOOTH)" is
If you set "USB" as the alarm mode, and a smartphone is connected via USB,
lit), you can use hands-free calling even if the BLUETOOTH function is not
the alarm will be the buzzer.
activated.
When there is an incoming call or outgoing call, the system automatically
To stop the alarm
changes to the BLUETOOTH function.
Press ALARM RESET to turn off the alarm. The alarm will sound again at the
To call
same time the next day.
Operate the BLUETOOTH mobile phone. Check that a dialing tone is heard on the
To doze for a few more minutes – Snooze function
system and talk into the system. If no dialing tone is heard, press
(call) on
the system for about 2 seconds to change the call device to the system.
1
SNOOZE
once while the alarm sounds.
Press
To receive a call
The alarm sound turns off but will automatically come on again after about 10
minutes.
When an incoming call arrives, the playback or radio pauses and a ring tone is
You can change the snooze time as follows by pressing SNOOZE
heard from the system. Press
(call) on the system and talk into the system.
repeatedly.
Tips
ˎ If no ring tone is heard from the system when an incoming call arrives, stop playback or radio
ˎ
and press
(call) to talk.
ˎ You can use the hands-free calling when playback is completed.
ˎ
ˎ During a call, press VOLUME –/+ on the system to adjust the volume. The volume of a call
ˎ
To stop the snooze timer, press ALARM RESET .
and that of a playback are set separately.
System button functions for the alarm function
Note
ˎ When using a mobile phone, keep it 50 cm or more away from the system. If they are too
ˎ
close together, noise may be heard.
To
Do this
To end a call
Confirm an alarm
Press ALARM TIME SET +/– .
time setting
The setting will be displayed for about 4 seconds.
Press
(call) . If you were listening to music with any function when the call
arrived, music will be resumed when the call has finished.
Change an alarm
1 Press and hold ALARM TIME SET +/– until the
time setting
alarm time digits begin to change in the display.
After use
You can change the alarm time step by step by
Do any of the following to terminate the BLUETOOTH connection.
pressing ALARM TIME SET +/– repeatedly.
ˎ Set the BLUETOOTH function of the BLUETOOTH device to off. For details, refer
ˎ
2 Release ALARM TIME SET +/– when the desired
to the operating instructions supplied with the device.
alarm time is displayed.
ˎ Turn off the BLUETOOTH device.
ˎ
ˎ Touch the system with the smartphone again to disconnect (NFC compatible
ˎ
Turn off the alarm
Press SNOOZE once while the alarm sounds.
smartphones only).
sound once
System button functions during a call
Stop the alarm
Press ALARM RESET .
Available functions may vary depending on the BLUETOOTH mobile phone, or the
Deactivate the alarm
Press A again.
profiles supported by the BLUETOOTH mobile phone. Refer to the operating
"" turns off in the display, and the alarm function is
instructions supplied with the BLUETOOTH mobile phone.
deactivated.
To activate the alarm again, press A again.
Status
(call)
Standby
ˎ Press once to start voice dial (voice dial compatible
ˎ
Tip
mobile phones only).
ˎ Even if the alarm is deactivated, the alarm will be activated when you change the alarm
ˎ
ˎ Press and hold for a few seconds to redial the phone
ˎ
setting.
number that is dialed last time.
Notes
ˎ When "USB" or "BLUETOOTH" is selected as the alarm mode, only the buzzer alarm will sound
ˎ
Outgoing call
ˎ Press once to cancel outgoing call.
ˎ
if an iPhone/iPod is not connected via USB, or a BLUETOOTH device is not connected, or
ˎ Press and hold for a few seconds to change call
ˎ
music is not stored in the device, or the device is turned off.
device between the system and mobile phone.
ˎ The volume of the buzzer is not adjustable.
ˎ
ˎ If the same alarm time is set for both alarm A and B, alarm A takes priority.
ˎ
Incoming call
ˎ Press once to answer call.
ˎ
ˎ If no operation is performed while the alarm is sounding, the alarm will stop after about 60
ˎ
ˎ Press and hold for a few seconds to reject call.
ˎ
minutes.
During call
ˎ Press once to finish call.
ˎ
Notes on the alarm in the event of a power interruption
ˎ Press and hold for a few seconds to change call
ˎ
In the event of a power interruption, the buzzer alarm will last about 5 minutes if the battery is
device between the system and mobile phone.
not weak. However, certain functions will be affected as follows:
ˎ The backlight will not light up.
ˎ
ˎ If the alarm mode is set to "USB," "BLUETOOTH," "FM" or "DAB," it will change to buzzer
ˎ
Using Hands-free Calling with Another BLUETOOTH Mobile Phone
automatically.
While Listening to Music
ˎ If ALARM RESET is not pressed, the alarm will sound for about 5 minutes.
ˎ
ˎ If "" lights up in the display, the alarm will not sound in the event of a power interruption.
ˎ
You can enjoy hands-free calling with another BLUETOOTH mobile phone while
Replace the battery if "" lights up.
listening to music with a BLUETOOTH music player.
ˎ The snooze function cannot be set during a power interruption.
ˎ
ˎ One-touch connection (NFC) cannot be used in this procedure.
ˎ
ˎ During a power interruption, each alarm will sound at the set time only once.
ˎ
ˎ Operations may vary depending on the BLUETOOTH device. This type of
ˎ
BLUETOOTH connection may not be established depending on the combination
of the BLUETOOTH devices. Refer also to the operating instructions supplied
Setting the Sleep Timer
with your BLUETOOTH devices.
1
Make the BLUETOOTH connections between the system
You can fall asleep listening to radio or music from the connected device using
the sleep timer. The system stops radio or playback automatically after a preset
and a BLUETOOTH music player via A2DP, and between the
duration.
system and a BLUETOOTH mobile phone via HFP or HSP.
For details on the BLUETOOTH connection procedure, see "How to Make
Wireless Connection with BLUETOOTH Devices." The BLUETOOTH connection is
established and " (BLUETOOTH)" in the display stays on.
Tips
ˎ To use only the calling function of a BLUETOOTH mobile phone that also has a music
ˎ
function, establish BLUETOOTH connection between the system and the mobile phone
via HFP or HSP, not via A2DP.
ˎ Depending on the BLUETOOTH mobile phone, while the BLUETOOTH connection is
ˎ
established via HFP or HSP, the other BLUETOOTH connection via A2DP may also be
occupied by the same BLUETOOTH mobile phone. A BLUETOOTH music player cannot be
connected with this system in this case.
Note
ˎ To make the same connection with the same devices after turning the system off, follow
ˎ
this procedure again.
1
SLEEP
Press
while listening to radio or music.
Setting the Alarm
"SLEEP" lights up and the sleep time duration begins to flash in the display.
ˎ You can set the alarm mode from the following.
ˎ
2
Press
SLEEP
to select the sleep time duration.
ˋ "DAB," "FM": Set the radio alarm.
ˎ
You can change the sleep time duration (in minutes) as follows by pressing
ˋ "USB": Set the alarm to sound from an iPhone/iPod via USB connection.
ˎ
SLEEP repeatedly. Only "OFF" does not flash.
ˋ "BLUETOOTH": Set the alarm to sound from a BLUETOOTH device, such as
ˎ
smartphone, iPod, etc., via BLUETOOTH connection.
ˋ "BUZZER": Set the buzzer alarm.
ˎ
ˎ Set the clock to the current time before setting the alarm, so that the alarm will
ˎ
sound at the correct time. (See "Setting the clock for the first time.")
The sleep time duration flashes for a few seconds, then the display returns to
the clock. The sleep timer setting is completed and the sleep timer starts.
"SLEEP" lights up in the display, and the system will stop radio or playback
automatically after the setting duration.
To stop listening before the preset time
Press OFF .
To change the sleep timer setting
Right side of the system
Press SLEEP . You can change the sleep time duration after the sleep timer has
been activated.
To deactivate the sleep timer
Press SLEEP to select "OFF."
Notes
ˎ Music playback on a device connected to the AUDIO IN jack does not stop automatically. To
ˎ
stop playback on the connected device, operate the connected device.
ˎ When the alarm time is set during the sleep timer duration, the sleep timer will be
ˎ
You can set alarm A and B. To set the alarm A, use A and ALARM TIME SET
deactivated automatically when the alarm sounds.
+/– . To set alarm B, use B and ALARM TIME SET +/– .
The following explains how to set the alarm A.
1
A
until the hour begins to flash in the
Press and hold
display.
"" and "WAKE UP" light up and the hour flashes in the display.
Useful DAB Functions
Menu item
DRC Value (DYNAMIC
RANGE CONTROL)
Right side of the system
Prune
Changing the display
During DAB station reception, you can change the display mode by pressing
DISPLAY .
Tip
ˎ The selected display mode is retained, even if you turn the system off, or change the station.
ˎ
1
Press
DISPLAY
.
Each time you press DISPLAY , the display changes as follows.
PTY (Programme Type)
Component label
Date
This function displays the current DAB broadcast programme type, such as NEWS,
SPORTS, etc., as shown in the PTY list below.
If the current DAB broadcast does not include programme type, "NO PTY Data"
appears.
PTY list
Programme type
Undefined
PTY
Dynamic label
(Programme type)
News
Current Affairs
Information
Sport
Education
Drama
Culture
Tip
ˎ "Dynamic Labels" in DAB broadcasts display useful information, such as programme
ˎ
Science
content, traffic updates, etc.
Varied
A dynamic label can be up to 128 characters in length. Up to 12 characters can be shown
at one time.
Pop Music
2
Press and hold
DISPLAY
.
Rock Music
Ensemble label
Easy Listening Music
Light Classical
Serious Classical
Other Music
Weather
Finance
Children's programmes
3
Press
DISPLAY
.
Social Affairs
Each time you press DISPLAY , the display changes as follows.
Religion
Channel and frequency
Phone In
Travel
Leisure
Jazz Music
Country Music
Nation Music
Broadcasting codec
Oldies Music
and bit rate
Folk Music
Documentary
Enjoying the Sound Effect Setting
Signal-to-noise ratio
By pressing DISPLAY while the signal-to-noise ratio is shown, the display
returns to step 1, or the display returns automatically after a few seconds.
Notes
ˎ If there is no component label, "No Label" is displayed.
ˎ
ˎ If there is no ensemble label, "No Label" is displayed.
ˎ
ˎ If there is no programme type, "None" is displayed.
ˎ
1
Press
ˎ If there is no dynamic label, the lower line of the display is blank.
ˎ
The sound effect setting lights up in the display.
ˎ Characters that cannot be displayed appear as "_".
ˎ
ˎ Depending on the broadcasting station, the characters in dynamic labels may not be
ˎ
displayed properly.
Useful DAB menu functions
The DAB menu includes several convenient functions. To display the DAB menu,
do the following.
1
FUNCTION
to select "DAB."
Press
Press FUNCTION repeatedly until "DAB" lights up in the display.
You can change the sound effect as follows by pressing SOUND
Right side of the system
2
Press
MENU
.
repeatedly.
The DAB menu is displayed.
Display
3
Press
PRESET/TUNE +/–
to select an item (see table
MEGA BASS
ENTER
to confirm.
below), then press
MEGA BASS
MEGA Xpand
Menu item
Function and operation
MEGA Xpand
Stations
Allows you to select a station while listening to another
one.
Off
1 Press PRESET/TUNE +/– to select "Stations," then
press ENTER to confirm.
2 Press PRESET/TUNE +/– to select the desired
station, then press ENTER to confirm.
Manual Preset
See "Presetting DAB or FM radio stations manually."
Tune Mode
See "Listening to DAB stations" and "Listening to preset
DAB or FM radio stations."
Auto Scan
Automatically scans receivable DAB stations, then
creates a list of those stations.
1 Press PRESET/TUNE +/– to select "Auto Scan,"
then press ENTER to confirm.
2 Press PRESET/TUNE +/– to select "Yes," then press
ENTER to confirm.
The system starts to scan, then creates a list of
receivable DAB stations.
Note
ˎ When auto scan is performed, an existing list will be updated
ˎ
and preset stations will be cleared. Preset desired stations
again as necessary.
Manual Tune
Allows you to tune and add DAB Band-III channels to
your station list.
Can be used to assist with positioning the system or
aerial, to optimize reception of a specific channel/
frequency.
1 Press PRESET/TUNE +/– to select "Manual Tune,"
then press ENTER to confirm.
2 Press PRESET/TUNE +/– to select the desired DAB
channel, then press ENTER to confirm.
The system searches stations, then creates a list of all
stations belonging to the channel.
3 Press PRESET/TUNE +/– to select the desired
station, then press ENTER to confirm.
Note
ˎ If the desired channel selected in step 2 cannot be received,
ˎ
press MENU to select another channel.
Ô Others
ˎ
Function and operation
Makes quieter sounds easier to hear when the system
is used in a noisy environment.
Replacing the Battery
For DAB broadcasts with dynamic range compression,
you can adjust the dynamic range by this system.
1 Press PRESET/TUNE +/– to select "DRC Value,"
then press ENTER to confirm.
CAUTION
2 Press PRESET/TUNE +/– to select the DRC level,
then press ENTER to confirm.
When to replace the battery
The DRC level changes as follows:
When the battery becomes weak, "" lights up in the display.
0
1/2
If a power interruption occurs while the battery is weak, the current time and
alarm will be erased.
Replace the battery with a Sony CR2032 lithium battery. Use of another battery
2
1 (default)
may cause a fire or explosion.
Notes
1
Keep the AC plug connected to the wall outlet, then open
ˎ DRC is effective only for dynamic range compression
ˎ
the battery compartment on the bottom of the system.
broadcasts.
ˎ When you adjust the DRC level, sound may be perceived as
ˎ
louder.
1 Fully loosen the screw.
Automatically deletes stations that are no longer
available.
1 Press PRESET/TUNE +/– to select "Prune," then
press ENTER to confirm.
The system deletes unavailable stations. When
2 Push the tab and
finished, "Finish!" appears for about one second, then
pull up the lid.
the system returns to the current station.
2
Remove the old battery and insert a new one in the battery
compartment with the side facing up.
Display
None
News
Affairs
Info
CR2032
Sport
3
Replace the battery compartment lid and tighten the
Educate
screw.
Drama
4
Press FUNCTION,
BLUETOOTH or SNOOZE/BRIGHTNESS
Arts
on the system to turn off "" in the display.
Science
Notes
Talk
ˎ When you replace the battery, do not disconnect the plug from the AC outlet. Otherwise, the
ˎ
current date, current time, alarm and station presets will be erased.
Pop
ˎ If you are not going to use the system for a long time, remove the battery to avoid any
ˎ
Rock
damage that may be caused by leakage or corrosion.
Easy
Setting the Brightness of the Display
Classics
Classics
Other M
Weather
Finance
Children
Factual
Religion
Phone In
Travel
Leisure
Jazz
1
Press BRIGHTNESS .
Country
You can change the four levels of brightness as follows by pressing
Nation M
BRIGHTNESS repeatedly.
Oldies
High (default)
Off
Folk
Middle
Low
Document
Even if brightness level is set to Off, it will change to Low while the alarm is
sounding.
Press and hold BRIGHTNESS to turn off the display directly.
Specifications
Time display
Switching between 12-hour system (default) or the 24-hour system.
Speaker section
Speaker system 50 mm
Enclosure type
Bass reflex
Amplifier section
Reference output power
2 W + 2 W (10 % T.H.D., 1 kHz, 5 Ω)
Input
Stereo mini jack × 1
USB section
SOUND
to select the sound effect.
Input
USB port (type A)
Supported sampling frequencies/bit
USB input: Maximum 44.1 kHz/16 bit
BLUETOOTH
Communication System
BLUETOOTH Specification version 3.0
Output
BLUETOOTH Specification Power Class 2
Maximum communication range
Line of sight approx. 10 m*
1
Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method
FHSS
Sound effect
Compatible BLUETOOTH Profiles*
2
A2DP (Advanced Audio Distribution Profile)
High-quality bass sound will be heard.
AVRCP (Audio Video Remote Control Profile)
Both high-quality bass and surround sound will be
HSP (Headset Profile)
heard.
HFP (Hands-free Profile)
SPP (Serial Port Profile)
Surround sound will be heard.
Supported Codec*
3
The sound effect is off.
SBC*
4
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
*
1
The actual range will vary depending on factors such as obstacles between
devices, magnetic fields around a microwave oven, static electricity, reception
sensitivity, aerial's performance, operating system, software application, etc.
*
BLUETOOTH standard profiles indicate the purpose of BLUETOOTH
2
communication between devices.
*
3
Codec: Audio signal compression and conversion format
*
Subband Codec
4
Microphone
Type:
Electret condenser
Direction characteristic:
Omni directional
Effective frequency range:
200 Hz – 3,600 Hz
Radio
Troubleshooting
Frequency range
Band
Frequency
Frequency step
DAB (Band-III)
174.928 MHz - 239.200 MHz
FM
87.5 MHz - 108 MHz
0.05 MHz
No sound / Sound from only
DAB (Band-III) frequency table (MHz)
one speaker / Low sound
No.
Channel
Frequency
level
1
5A
174.928
2
5B
176.640
3
5C
178.352
4
5D
180.064
5
6A
181.936
6
6B
183.648
7
6C
185.360
8
6D
187.072
Check that both this system and the
Turn up the volume of the system and
9
7A
188.928
connected device are turned on.
the connected device.
10
7B
190.640
11
7C
192.352
12
7D
194.064
13
8A
195.936
14
8B
197.648
Check that the connected device is
Check that both plugs of the
15
8C
199.360
being played back.
connecting cord (not supplied) or both
16
8D
201.072
connectors of the USB cable (not
supplied) are firmly inserted into the
17
9A
202.928
system and the connected device.
18
9B
204.640
19
9C
206.352
20
9D
208.064
21
10A
209.936
22
10B
211.648
23
10C
213.360
If you are connecting a personal
Pair this system and the BLUETOOTH
computer to the system, make sure
device again.
24
10D
215.072
the audio output setting of the
computer is set for a BLUETOOTH
25
11A
216.928
device.
26
11B
218.640
27
11C
220.352
28
11D
222.064
29
12A
223.936
30
12B
225.648
31
12C
227.360
If the connected device is monaural,
Check that the function for the
32
12D
229.072
sound will only be output from the left
connected device ("BLUETOOTH,"
speaker.
"USB" or "AUDIO IN") is activated.
33
13A
230.784
34
13B
232.496
35
13C
234.208
36
13D
235.776
37
13E
237.488
Distorted sound / Humming
38
13F
239.200
or noise in the system
General
output
Power
230 V AC, 50 Hz, 18 W
For clock back up
3 V DC, CR2032 battery (1)
Dimensions
Approximately 281 mm × 126 mm × 80 mm (w/h/d)
Mass
Approximately 1.3 kg including batteries
Supplied accessories
BLUETOOTH Startup Guide (1)
Operating Instructions (this document) (1)
Compatible iPhone/iPad/iPod models
Turn down the volume of the system
If the connected device has an
and the connected device.
equalizer function, set it to off.
The compatible iPhone/iPad/iPod models are as follows.
Update the software of the iPhone/iPad/iPod to the latest version before using it
with this system.
USB works with
iPhone 5
iPhone 4S
iPhone 4
iPod touch (5th generation)
Keep the system away from a
Bring this system and the BLUETOOTH
iPod touch (4th generation)
microwave oven, wireless LAN, etc.
device closer together. Remove any
iPod touch (3rd generation)
obstacle between this system and the
iPod classic
BLUETOOTH device.
iPod nano (7th generation)
iPod nano (6th generation)
iPod nano (5th generation)
iPod nano (4th generation)
BLUETOOTH technology works with
iPhone 5
iPhone 4S
iPhone 4
Keep the system away from a TV.
Switch the BLUETOOTH connection to
A2DP by operating the BLUETOOTH
iPhone 3GS
device when HFP or HSP is set.
iPad (4th generation)
iPad mini
iPad (3rd generation)
iPad 2
iPad
iPod touch (5th generation)
iPod touch (4th generation)
iPod touch (3rd generation)
iPod nano (7th generation)
If you connect a device with a built-in
Design and specifications are subject to change without notice.
radio or tuner to this system,
broadcasts may not be received, or
sensitivity may be reduced. Locate the
system farther away from the device
and check that you can listen to the
broadcasts satisfactorily.
For BLUETOOTH devices:
Pairing is not possible
Bring this system and the BLUETOOTH
If the
device to within 1 m of each other.
flashing quickly, press and hold
BLUETOOTH
system until beeps are heard.
For BLUETOOTH
devices: No voice / Low
voice from recipient
Check that both this system and the
Check that output of the BLUETOOTH
connected device are turned on.
mobile phone is set for the system.
Select HFP or HSP BLUETOOTH
Turn up the volume of the system and
connection by operating the
the connected device.
BLUETOOTH device.
For BLUETOOTH devices:
One-touch connection
(NFC) is not possible
Keep the smartphone close to the
Check that the NFC function of the
system until the smartphone
smartphone is set to on.
responds. If you fail, move the
smartphone slightly on the N marked
part of the system.
Check that the "NFC Easy Connect"
If the smartphone is in a case, remove
app is displayed on the smartphone.
it.
NFC receiving sensitivity depends on
the device. If you fail to connect with a
smartphone by One touch several
times, connect to the system by
on-screen operation.
Alarm does not sound
Check that the device set for the alarm
Check that the alarm indication "" or
"" is properly displayed.
is connected to the system.
Clock is not displayed correctly
When the clock flashes "AM 12:00" or
"0:00" due to a power interruption,
replace the battery with a new one.
(BLUETOOTH) indicator is not
PAIRING on the