Sony ZS-PS20CP Instruções de utilização - Página 2
Procurar online ou descarregar pdf Instruções de utilização para Sistema estéreo Sony ZS-PS20CP. Sony ZS-PS20CP 2 páginas. Personal audio system
Imprimir página
Other Operations
Using the display
Playing tracks/MP3/WMA files in
random order
(Shuffle Play)
You can check information about the CD using the
display.
You can play tracks/MP3/WMA files in random order.
1
Press CD
on the unit.
Checking the information of an audio CD
"CD" appears in the display.
2
To check the total track number and playing
Press MODE
until "SHUF" appears in the display.
time of the CD
When you select Folder Shuffle Play (MP3/WMA disc
Press
to stop the CD playback.
only), press MODE
on the unit until " " and
"SHUF" appear in the display. Then press
on the unit to select the folder you want.
3
Press
to start Shuffle Play.
To cancel Shuffle Play
Total track number
Stop playing first. Then press MODE
disappears from the display.
Total playing time
Tips
During Shuffle Play, you cannot select the previous track/MP3/
Checking the information of an MP3/WMA
WMA file by pressing
.
disc
The resume function does not work during Shuffle Play.
To check the total folder number on the CD
Press
to stop the CD playback.
Creating your own program
(Example: When you place MP3 disc)
Play)
You can arrange the playing order of up to 25 tracks/
MP3/WMA files on a CD.
1
Press CD
on the unit.
"CD" appears in the display.
Total folder number
2
Press MODE
until "PGM" appears in the display.
3
Press
or
to select the track/MP3/WMA
To check file information
file, and then press DISPLAY/ENTER
Press DISPLAY/ENTER
on the unit while playing an
the program.
MP3/WMA disc. The display changes as follows:
Repeat to program other tracks in the order that you
want.
The current file number and playing time
After programming the first track, "STEP 1" appears,
followed by selected track/MP3/WMA file.
The song title ( )*
Each time you add a track/MP3/WMA file, a step
number is added.
The artist name ( )
Audio CD (Program Play)
Total playing time of the selected track
The album name ( )*
* If the file does not have ID3 information, file name or folder name
appears in the display.
Playing tracks/MP3/WMA files
Programmed track number
repeatedly
(Repeat Play)
MP3/WMA disc (Program Play) (Example: When you place MP3 disc)
You can play tracks/MP3/WMA files repeatedly in
normal, shuffle or program play modes.
1
Press CD
on the unit.
"CD" appears in the display.
2
Proceed as follows:
Programmed file number
To repeat
Do this
4
Press
to start Program Play.
A single track/
1 Press REPEAT
on the unit until
MP3/WMA
"
1" appears.
To cancel Program Play
file
2 Press
or
to select the
Stop playing first. Then press MODE
track/MP3/WMA file that you want
disappears from the display.
to repeat.
3 Press
.
To clear the program you set
All tracks/
1 Press REPEAT
on the unit until
Press
.
MP3/WMA
" " appears.
"NO STEP" appears in the display for 2 seconds, and the
files on the CD
2 Press
.
same display information as when inserting a CD
A selected
1 Press MODE
until " " appears
appears.
folder (MP3/
and then press REPEAT
until
Tips
WMA disc
"REP" appears.
You can play the same program again, since the program is saved,
only)
2 Select the folder by pressing
+ or
until you press or open the CD compartment.
–
.
The resume function does not work during Program Play.
3 Press
.
Tracks/MP3/
1 Start Shuffle Play (see "Playing tracks/
WMA files in
MP3/WMA files in random order").
Presetting radio stations
random order
2 Press REPEAT
on the unit until
" " appears.
You can store radio stations in unit's memory. You can
3 Press
.
preset up to 30 radio stations, 20 for FM and 10 for AM
in any order.
MP3/WMA
1 Start Folder Shufle Play (see "Playing
1
files in a
tracks/MP3/WMA files in random
Press RADIO
repeatedly on the unit to select the
band.
selected folder
order").
in random
2 Press REPEAT
on the unit until
2
Hold down RADIO
on the unit for 2 seconds until
order (MP3/
" " appears.
"AUTO" flashes in the display.
WMA disc
3 Press
.
3
Press DISPLAY/ENTER
on the unit.
only)
The stations are stored in memory from lower
Programed
1 Program tracks/MP3/WMA files (see
frequencies to higher ones.
tracks/MP3/
"Creating your own program").
WMA files
2 Press REPEAT
on the unit until
If a station cannot be preset automatically
" " appears.
You may need to preset a station with a weak signal
3 Press
.
manually.
1
Press RADIO
repeatedly on the unit to select the
band.
To cancel Repeat Play
Press REPEAT
on the unit until " " disappears from
2
Tune in the station you want.
the display.
3
Hold down DISPLAY/ENTER
seconds until the preset number flashes in the
display.
4
Press PRESET + or –
on the unit until the preset
number you want for the station flashes in the
display.
5
Press DISPLAY/ENTER
on the unit.
The new station replaces the old one.
Tip
The preset radio stations remain in memory even if you unplug the
AC power cord or remove the batteries.
Precautions
Discs that this unit CAN play
Playing preset radio stations
Audio CD
CD-R/CD-RW (CD-DA*/MP3/WMA files)
1
Press RADIO
repeatedly on the unit to select the
* CD-DA is the abbreviation for Compact Disc Digital Audio. It is a
band.
recording standard used for Audio CDs.
2
Press PRESET + or –
on the unit to tune in the
Discs that this unit CANNOT play
stored station.
CD-R/CD-RW other than those recorded in music CD
format, WMA format and MP3 format conforming to
ISO9660 Level 1/Level 2 or Joliet
Falling asleep to music
CD-R/CD-RW of poor recording quality, CD-R/CD-RW
+ or –
that has scratches or is dirty, or CD-R/CD-RW recorded
1
Play the music source you want.
with an incompatible recording device
2
Press SLEEP
to display "SLEEP".
CD-R/CD-RW which is incorrectly finalized
3
Press SLEEP
to select the minutes until the unit
Notes on discs
goes off automatically.
Before playing, clean the CD with a cleaning cloth.
until "SHUF"
Each time you press the button, the indication changes
Wipe the CD from the center out. If there is a scratch,
as follows:
dirt or fingerprints on the CD, it may cause a tracking
"AUTO*" "60MIN" "30MIN" "20MIN"
error.
"10MIN" "OFF".
* When you select "AUTO", the CD and USB stops playing in 90
minutes at most and the unit goes off automatically. When you
are listening to the radio and audio in, the unit goes off in 90
minutes.
When the preset time has passed, the unit goes off
(Program
automatically.
If 4 seconds pass after pressing SLEEP
, the
Do not use solvents such as benzine, thinner,
currently displayed time option is entered.
commercially available cleaners or anti-static spray
intended for vinyl LPs.
To cancel the sleep function
Do not expose the CD to direct sunlight or heat sources
Press OPERATE
to turn off the power, or press SLEEP
repeatedly to set the sleep timer to "OFF" in step 3.
such as hot air ducts, nor leave it in a car parked in
direct sunlight as there can be a considerable rise in
temperature inside the car.
Do not stick paper or stickers on the CD, nor scratch
Playable USB devices
the surface of the CD.
to add it to
After playing, store the CD in its case.
You can use the following Sony USB devices on this unit.
Other USB devices are not playable on this unit.
On safety
As the laser beam used in the CD player is harmful to
Verified Sony digital music players (as of
the eyes, do not attempt to disassemble the casing.
January 2008)
Refer servicing to qualified personnel only.
Should any solid object or liquid fall into the unit,
Product name
Model name
unplug the unit, and have it checked by qualified
Walkman
NWD-B103 / B103F / B105 /
personnel before operating it any further.
B105F
Discs with non-standard shapes (e.g., heart, square,
star) cannot be played on this unit. Attempting to do so
NWZ-A815/A816/A818
may damage the unit. Do not use such discs.
NWZ-S515/S516/S615F/S616F/
S618F/S716F
On power sources
For AC operation, check that the unit's operating
voltage is identical with your local power supply (see
"Specifications") and use the supplied AC power cord;
Check the websites below for the latest information about
do not use any other type.
compatible devices.
The unit is not disconnected from the AC power source
For customers in Europe:
(mains) as long as it is connected to the wall outlet,
<http://support.sony-europe.com/>
even if the unit itself has been turned off.
For customers in Latin America:
Unplug the unit from the wall outlet when it is not used
<http://www.sony-latin.com/pa/info>
for an extended period of time.
For customers in Asia and Oceania:
When the batteries are not to be used, remove them to
<http://www.sony-asia.com/section/support>
avoid damage that can be caused by battery leakage or
Notes
corrosion.
When formatting the above models, be sure to format using the
The nameplate and important information concerning
model itself or the dedicated formatting software for that model.
safety are located on the bottom exterior.
Do not use any other than these USB devices. Operation of models
not listed here is not guaranteed.
On placement
Operation may not always be ensured even when using these USB
until "PGM"
devices.
Do not leave the unit in a location near heat sources, in
Some of these USB devices may not be available for purchase in
a place subject to direct sunlight, excessive dust or
certain areas.
mechanical shock, or in a car subject to the direct rays
Playback of Windows Media Audio/AAC files with copyright
of the sun.
protection is not supported.
Files downloaded from a music download website may not be
Do not place the unit on an inclined or unstable place.
played.
Do not place anything within 10 mm of the side of the
Connection through a hub is not supported.
cabinet. The ventilation holes must be unobstructed for
the unit to operate properly and prolong the life of its
components.
Since a strong magnet is used for the speakers, keep
personal credit cards using magnetic coding or spring-
wound watches away from the unit to prevent possible
damage from the magnet.
On operation
If the unit is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lens inside the CD player. Should
this occur, the unit will not operate properly. In this
case, remove the CD and wait about an hour for the
moisture to evaporate.
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder, or
solvent, such as alcohol or benzine.
If you have any questions or problems concerning your
unit, please consult your nearest Sony dealer.
on the unit for 2
USB device
Troubleshooting
Are you using a compatible USB device?
If you connect an incompatible USB device, the
General
following problems may occur. See "Playable USB
devices" for a list of devices that are supported.
– The USB device is not recognized.
The power is not on.
– File or folder names are not displayed on this unit.
Connect the AC power cord to the wall outlet securely.
– Playback is not possible.
Make sure the batteries are inserted correctly.
– The sound skips.
Replace all the batteries with new ones if they are weak.
– There is noise.
You cannot turn on the unit with the remote when you
operate the unit on batteries.
– The sound output is distorted.
There is no audio.
"OVER CURRENT" appears.
An abnormal level has been detected in the electrical
Unplug the headphones when listening through
speakers.
current from the
(USB) port
and remove the USB device from the
Noise is heard.
Make sure there is no problem with the USB device. If
this message persists, contact your nearest Sony dealer.
Someone is using a portable telephone or other
equipment that emits radio waves near the unit.
There is no sound.
Move the portable telephone, etc., away from the
unit.
The USB device is not connected correctly. Turn off the
unit and reconnect the USB device. Then turn on the
unit and check whether the "USB MEMORY" lights up
CD/MP3/WMA player
or not in the display.
The CD does not play or "NO DISC" is displayed
There is noise, skipping, or distorted sound.
even when a CD is in place.
Turn off the unit and reconnect the USB device. Then
Place the CD with the label surface up.
turn on the unit again.
Clean the CD.
The music data itself contains noise, or the sound is
Take out the CD and leave the CD compartment open
distorted. Noise may have entered during the recording
for about an hour to dry moisture condensation.
process. Delete the file and try recording it again.
The CD-R/CD-RW is blank.
There is a problem with the quality of the CD-R/
The USB device cannot be connected to the
CD-RW, recording device or application software.
(USB) port
.
Replace all the batteries with new ones if they are weak.
The connector on the USB device or USB cable was not
correctly oriented when the connection was attempted.
The sound drops out.
Connect the connector on the USB device or USB cable
in the correct orientation.
Reduce the volume.
Clean the CD, or replace it if the CD is badly damaged.
"READING" is displayed for an extended time,
Place the unit in a location free from vibration.
or it takes a long time before playback starts.
Clean the lens with a commercially available blower.
The reading process can take a long time in the
The sound may drop out or noise may be heard when
following cases:
using poor quality CD-Rs/CD-RWs or if there is a
– There are many folders or files on the USB device.
problem with the recording device or application
software.
– The file structure is extremely complex.
– The memory is almost full.
Starting playback takes more time than usual.
– The internal memory is fragmented.
The following discs take a longer time to start playback.
To avoid the above problems, we recommend that you
– a disc recorded with a complicated tree structure.
adhere to the following guidelines:
– a disc that has not been finalized (a disc to which data
– Keep the total number of folders on USB device to
can be added).
100 or less
– a disc that has many folders or non-MP3/WMA files.
– Keep the total number of files per folder to 100 or less.
Radio
Erroneous display
The data stored on the USB device may be corrupted.
Reception is poor.
Send the music data to the USB device again.
This unit can display only numbers and letters of the
Reorient the antenna to improve FM reception.
alphabet. Other characters will not be displayed
correctly.
The USB device is not recognized.
Turn off the unit and reconnect the USB device, then
turn on the unit.
Connect the supported USB device (See "Playable USB
devices" (on this page) for the supported device types.).
The USB device does not work properly. Refer to the
USB device operation manual for details on how to deal
Reorient the unit itself to improve AM reception.
with this problem. If the problem persists, contact your
nearest Sony dealer.
Play does not start.
Turn off the unit and reconnect the USB device.
Connect a USB device that this unit can play (see
"Playable USB devices").
The audio is weak or has poor quality.
Play does not start from the first track.
Replace all the batteries with new ones if they are weak.
Set the play mode to Normal Play.
Move the unit away from the TV.
If you are using the remote while listening to AM radio,
MP3/WMA files cannot be played back.
noise may be heard.
The MP3/WMA files do not have the ".mp3" or ".wma"
extension.
The picture of your TV becomes unstable.
The data was not stored in the MP3/WMA format.
If you are listening to an FM program near the TV with
The USB storage device uses a file system other than
an indoor antenna, move the unit away from the TV.
FAT16 or FAT32.*
The USB storage device is partitioned. Only the MP3/
WMA files in the first partition can be played.
Playback is possible up to 8 levels.
The number of folders exceeds 255.
The number of files exceeds 999.
The files are encrypted or protected by passwords.
* This unit supports FAT16 and FAT32, but some USB storage media
may not support both file systems.
For details, refer to the operation manual of the USB storage device
in question or contact the manufacturer.
Remote
The remote does not function.
Replace all the batteries in the remote with new ones if
they are weak.
Make sure that you are pointing the remote at the
remote sensor on the unit.
Remove any obstacles in the path of the remote and the
unit.
Make sure the remote sensor is not exposed to strong
light such as direct sunlight or fluorescent lamp light.
Move closer to the unit when using the remote.
After trying the remedies, if you still have problems,
unplug the AC power cord or remove all the batteries.
After all the indications in the display disappear, plug the
AC power cord or insert the batteries again. If the
problem persists, please consult your nearest Sony dealer.
. Turn off the unit
(USB) port
.