Sony ZS-RS60BT Instruções de utilização - Página 2
Procurar online ou descarregar pdf Instruções de utilização para Sistema estéreo Sony ZS-RS60BT. Sony ZS-RS60BT 2 páginas. Personal audio system
Também para Sony ZS-RS60BT: Instruções de utilização (2 páginas)
Imprimir página
4
Press ENTER
.
Other Operations
The track/file is programmed.
The program step number appears, followed by
the total playing time.
(Example: audio CD)
Using the display
Checking the information of an audio CD
Press
twice to cancel Resume Play.
The total number of tracks and total playing time
Step number
appear on the display.
Checking MP3/WMA/AAC file information
Last programmed track number
Press DISPLAY
repeatedly while playing an
MP3/WMA file on the disc or an MP3/WMA/AAC
file on the USB device.
The display changes as follows:
Song title ( )*
1, 2
Total playing time*
Artist name ( )*
1
* "--:--" appears when programming an MP3/WMA
disc/USB device or when the total playing time is
longer than 100 minutes.
Album name (
)*
1
5
Repeat steps 3 and 4 to program additional
tracks/files.
6
Current file number and playing time*
3
Press
to start Program Play.
To play the same program again, press
*
1
If the file does not have corresponding ID3, WMA or AAC
Note that the created program is cleared in the
tag information, the file name, "NO ARTIST," and "NO
ALBUM" scroll on the display instead of the song title,
following cases:
artist name, and album name.
When you open the CD compartment.
*
2
The function name is displayed for 2 seconds before the
When you connect another USB device.
song title appears.
When you turn off the power of the unit in the
*
3
The artist name or album name will change to this in a
CD function.
few seconds.
Note
Checking the connected BLUETOOTH
If you try to program 26 tracks/files or more, "FULL" flashes
on the display.
device name
Press DISPLAY
while connecting the
To display programmed track/file
information
BLUETOOTH device.
After creating your own program, you can check
information about programmed tracks/files.
Checking the radio information
Press DISPLAY
repeatedly and the display
Press DISPLAY
repeatedly while listening to
changes as follows:
the radio.
Total number of steps Last programmed track/
The display changes as follows:
file number and the total playing time*
Preset number*
1, 2
Frequency
* "--:--" appears for MP3/WMA discs and USB devices.
*
1
A preset number is displayed only when you are listening
to the preset radio station.
To cancel Program Play
*
2
The display automatically returns to the frequency display
Press
to stop playback, and then press PLAY
after 2 seconds have elapsed.
MODE
repeatedly until "PGM" disappears from
the display.
Selecting play mode
To delete all tracks/files in the current
program
You can set the unit to play tracks or files repeatedly
Stop playback, and then press
or in random order while a disc/USB device is
appears and you can create a new program,
stopped.
following the procedure "Creating your own
program (Program Play)."
Press PLAY MODE
repeatedly.
Presetting radio stations
You can store radio stations in the unit's memory.
Each time you press the button, the indication
You can preset up to 30 radio stations, 20 for FM and
changes as follows:
10 for AM.
Normal play (None)
1
Press FM/AM
repeatedly to turn on the
radio function and select the band "FM" or
Single repeat (
1)
"AM."
2
Hold down FM/AM
until "AUTO" flashes on
All repeat (
)
the display.
Selected folder play (
)*
Selected folder repeat play (
,
)*
3
Press ENTER
to store the station.
Shuffle play (
)
The stations are stored in memory from lower
frequencies to higher ones.
Program play (PGM)
If a station cannot be preset
automatically
Program repeat play (
, PGM)
You need to preset a station with a weak signal
manually.
* These functions are available only when playing MP3/
WMA files on an MP3/WMA disc or MP3/WMA/AAC files
1
Press FM/AM
repeatedly to select a band.
on a USB device.
2
Tune to the desired station.
3
Hold down ENTER
until "FM-xx" or "AM-xx"
Playing tracks/files repeatedly (Repeat
flashes on the display.
Play)
(Example: FM)
You can set the unit to repeatedly play CD-DA tracks
on an audio CD, MP3/WMA files on a CD-R/CD-RW
disc, or MP3/WMA/AAC files on a USB device in
normal and program play modes.
1
Press CD
or USB
to turn on the CD or
4
USB function.
Press PRESET + or
until the preset
2
Proceed as follows.
number for the station you want flashes on
the display.
To repeat
Do this
5
Press ENTER
to store the station.
1 Press PLAY MODE
A single track/
If another station is already assigned to the
repeatedly until "
1" appears.
file
selected preset number, that station is replaced
2 Press or to select
by the new one.
a track/file that you want to
repeat.
Tip
3 Press .
The preset radio stations remain in the unit's memory even
in the following situations.
1 Press PLAY MODE
All tracks/files
The AC power cord is unplugged.
repeatedly until " " appears.
The batteries are removed.
2 Press .
1 Press PLAY MODE
A selected folder
on an MP3/WMA
repeatedly until " " and " "
Listening to preset radio stations
appear.
disc or USB
2 Select a folder by pressing
+
device
1
Press FM/AM
repeatedly to turn on the
or .
3 Press .
radio function and select the band "FM" or
"AM."
1 Program tracks/files (see
Programmed
2
"Creating your own program
Press PRESET + or
to select a stored
tracks/files
(Program Play)").
preset number for the desired radio station.
2 Press PLAY MODE until
"PGM" and " " appear on the
display.
Using the Sleep Timer
3 Press .
You can set the unit to turn off automatically after a
To cancel Repeat Play
set time has elapsed.
Press
to stop playback, and then press PLAY
MODE
repeatedly until " " (or "
1") disappears
1
Press SLEEP
.
from the display.
The default setting ("90") appears and the
"SLEEP" indicator lights up on the display.
Playing tracks/files in random order
2
Press SLEEP
repeatedly to select the
(Shuffle Play)
desired setting.
You can set the unit to play CD-DA tracks on an
audio CD, MP3/WMA files on a CD-R/CD-RW disc or
MP3/WMA/AAC files on a USB device in random
order.
1
Press CD
or USB
to turn on the CD or
Each time you press the button, the duration (in
USB function.
minutes) changes on the display, and the
2
Press PLAY MODE
repeatedly until " "
selected setting is confirmed automatically after
appears on the display.
about 4 seconds.
3
Press
to start Shuffle Play.
Tip
You can check the time left until the unit turns off by
To cancel Shuffle Play
pressing SLEEP
again after setting the sleep timer.
Press
to stop playback, and then press PLAY
MODE
repeatedly until "
" disappears from the
display.
Connecting optional components
Tip
During Shuffle Play, you cannot select the previous track/file
by pressing
.
You can enjoy the sound from an optional
component, such as a portable digital music player,
through the speakers of this unit.
Creating your own program (Program
Be sure to turn off the power of each component
Play)
before making any connections.
You can arrange the playing order of up to 25
For details, refer to the instruction manual of the
tracks/files on a disc/USB device.
component to be connected.
1
Press CD
or USB
to turn on the CD or
1
Connect the AUDIO IN jack
USB function.
output jack of the portable digital music
2
Press PLAY MODE
repeatedly until "PGM"
player or other component using an audio
appears on the display.
connection cable (not supplied).
3
Press or
to select a track/file.
2
Turn the connected component on.
When you want to specify a folder that contains
3
Press AUDIO IN
and start playing sound on
+ or
MP3/WMA/AAC files, press
first to
select a folder, and then press or
the connected component.
to
select a file.
The sound from the connected component is
output from the speakers.
To connect the unit to a TV or video recorder/
player, use an extension cable (not supplied) with
a stereo-mini jack on one end and two phono
plugs on the other end.
Additional Information
Precautions
Discs that this unit CAN play
Compatible devices
Audio CD (CD-DA*
CD-R/CD-RW that contains MP3/WMA files and
Compatible USB devices
Compatibility requirements for the USB devices are
*1
as follows. Before using a device with this unit,
check that it meets the requirements.
*2
Compliance with USB 2.0 (Full Speed)
Supports Mass Storage mode*
* Mass Storage mode is a mode that allows a USB device
Discs that this unit CANNOT play
to become accessible to a host device, enabling file
transfers. Most USB devices support Mass Storage
CD-R/CD-RW other than those recorded in audio
mode.
Notes on the USB device
CD-R/CD-RW of poor recording quality, CD-R/
When a USB device is connected, the unit reads all the
files on the device. If there are many folders or files on the
device, it may take a long time for the unit to finish
reading them.
Do not connect a USB device to the unit through a USB
CD-R/CD-RW that is unfinalized or finalized
hub.
With some connected USB devices, after an operation is
performed, there may be a delay before it is performed by
Notes on discs
this unit.
Clean the CD with a cleaning cloth if
This unit may not support all the functions provided with
.
a connected USB device.
The playback order on this unit may differ from the
playback order on a connected USB device.
Do not use solvents such as
Compatible BLUETOOTH devices
Compatibility requirements for the devices are as
follows. Before using a device with this unit, check
that it meets the requirements.
Do not expose the CD to direct sunlight or heat
Devices must conform to BLUETOOTH Standard
version 2.1 + EDR.
Devices must support A2DP (Advanced Audio
Distribution Profile) and AVRCP (Audio/Video
Do not stick paper or a sticker on the CD, or
Remote Control Profile).
NFC capability (required only when using the NFC
After playing, store the CD in its case.
pairing function of the unit).
For the latest information on compatible
Note on DualDiscs
BLUETOOTH devices, including NFC-compatible
A DualDisc is a two sided disc product which
smartphones, check the websites below.
For customers in Europe:
http://www.sony.eu/support
For customers in Latin America:
http://esupport.sony.com/LA
For customers in other countries/regions:
Music discs encoded with copyright
http://www.sony-asia.com/support
protection technologies
This product is designed to playback discs that
What is BLUETOOTH wireless
technology?
. "NO STEP"
BLUETOOTH wireless technology is a short-range
wireless technology that enables wireless data
communication between digital devices, such as a
computer and digital camera. BLUETOOTH wireless
On safety
technology operates within a range of about 10 m.
As the laser beam used in the CD player section is
Connecting two devices as necessary is common,
but some devices can be connected to multiple
devices at the same time.
You do not need to use a cable for connection, nor is
Should any solid object or liquid fall into the unit,
it necessary for the devices to face one another,
such is the case with infrared technology. For
example, you can use such a device in a bag or
Discs with non-standard shapes (e.g., heart,
pocket.
BLUETOOTH standard is an international standard
supported by thousands of companies all over the
world, and employed by various companies
worldwide.
On power sources
Maximum communication range
For AC operation, use the supplied AC power cord;
Maximum communication range may shorten under
the following conditions.
Unplug the unit from the wall outlet if it is not to
There is an obstacle such as a person, metal, or
wall between the unit and BLUETOOTH device.
When not using the batteries, remove them to
A wireless LAN device is in use near the unit.
A microwave oven is in use near the unit.
A device that generates electromagnetic radiation
On placement
is in use near the unit.
Do not leave the unit in a location near heat
The unit is placed on a shelf made of steel.
The unit
Do not place the unit on an inclined or unstable
Do not place anything within 10 mm of the rear of
Since a strong magnet is used for the speakers,
Steel cabinet
Optimal performance
On operation
Limited performance
If the unit is brought directly from a cold to a
Interference from other devices
Because BLUETOOTH devices and wireless LAN
(IEEE802.11b/g/n) use the same frequency,
microwave interference may occur and resulting in
communication speed deterioration, noise, or invalid
On handling the unit
connection if the unit is used near a wireless LAN
Do not leave the CD compartment open to avoid
device. In such a case, perform the following.
Use the unit at least 10 m away from the wireless
LAN device.
On cleaning the cabinet
If the unit is used within 10 m of a wireless LAN
Clean the cabinet, panel and controls using a soft
device, turn off the wireless LAN device.
Use the BLUETOOTH device as close to the unit as
possible.
Interference to other devices
Microwaves emitting from a BLUETOOTH device may
If you have any questions or problems concerning
affect the operation of electronic medical devices.
your unit, consult your nearest Sony dealer.
Turn off the unit and other BLUETOOTH devices in
the following locations, as it may cause an accident.
where inflammable gas is present, in a hospital,
train, airplane, or a gas station
near automatic doors or a fire alarm
Notes
To be able to use the BLUETOOTH function, the
BLUETOOTH device to be connected requires the same
profile as the unit's.
Note also that even if the same profile exists, devices may
vary in function depending on their specifications.
Due to the characteristic of BLUETOOTH wireless
technology, the sound played on the unit is slightly
delayed from the sound played on the BLUETOOTH device
during listening to the music.
This unit supports security capabilities that comply with
the BLUETOOTH standard to provide a secure connection
when the BLUETOOTH wireless technology is used, but
security may not be enough depending on the setting. Be
careful when communicating using BLUETOOTH wireless
technology.
We do not take any responsibility for the leakage of
information during BLUETOOTH communication.
A device featuring the BLUETOOTH function is required to
conform to the BLUETOOTH standard specified by
Bluetooth SIG, and be authenticated. Even if the
connected device conforms to the above mentioned
BLUETOOTH standard, some devices may not be
connected or work correctly, depending on the features or
specifications of the device.
Noise or sound skips may occur depending on the
BLUETOOTH device connected with the unit, the
communication environment or the usage environment.
to the line
Troubleshooting
General
1
tracks)
The power does not turn on.
2
is finalized*
correctly.
Make sure the AC power cord is connected to the
wall outlet securely.
CD-DA is the abbreviation for Compact Disc Digital Audio.
Make sure the connector of AC power cord is
It is a recording standard used for audio CDs.
inserted into the AC IN jack securely.
Finalizing is the process to make the CD-R/CD-RW discs
playable on the consumer disc player products, and the
Check if the batteries are inserted correctly,
finalizing can be enabled or disabled as optional settings
matching the polarities.
during disc creation in most recording software.
Replace all the batteries with new ones when the
OPR/BATT indicator dims.
There is no sound.
CD format or formats conforming to ISO 9660
Make sure the appropriate function is selected for
Level 1/Level 2 or Joliet
the music or sound source you want to listen to.
Unplug the headphones when listening through
CD-RW with scratches or that is dirty, or CD-R/
speakers.
CD-RW recorded using an incompatible recording
device
The sound is noisy.
Is someone using a mobile phone or other
incorrectly
equipment emitting radio waves near the unit? If
so, move the unit and the BLUETOOTH device
away from such devices. Devices such as mobile
phones, etc., can affect BLUETOOTH
the disc is dirty. Wipe the disc from
communication.
the center out. If there are scratches,
dirt or fingerprints on the disc, a
A small humming noise is heard from the
tracking error may occur.
radio.
This is not a malfunction. You may hear a small
benzine, thinner, commercially
humming noise from the radio depending on the
available cleaners or anti-static
status of the power supply.
spray intended for vinyl LPs.
"NOT IN USED" appears.
sources such as hot air ducts, or leave it in a car
You pressed an invalid button.
parked in direct sunlight as there can be a
considerable rise in temperature inside the car.
CD/MP3/WMA player
scratch the surface of the CD.
The CD player does not play even when a
CD is in place.
Place the CD with the label side up.
Clean the CD.
Take out the CD and leave the CD compartment
mates DVD recorded material on one side with
open for about an hour to dry moisture
digital audio material on the other side. However,
condensation.
since the audio material side does not conform to
The CD-R/CD-RW is blank or unfinalized.
the Compact Disc (CD) standard, playback on this
product is not guaranteed.
There are no playable MP3/WMA files on the disc.
There is a problem with the quality of the CD-R/
CD-RW, recording device or application software.
Replace all the batteries with new ones when the
OPR/BATT indicator dims.
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
"NO CD" appears when the disc is loaded.
copyright protection technologies are marketed
No disc is set in the CD compartment. Set a disc.
by some record companies. Please be aware that
The CD may have a reading problem. Replace the
among those discs, there are some that do not
disc.
conform to the CD standard and may not be
The CD may be placed upside down. Place the
playable by this product.
disc with the label side up.
An unplayable disc (DVD, BD, etc.) is loaded.
Replace the disc.
harmful to eyes, do not attempt to disassemble
"NO TRACK" appears on the display when
the casing. Refer servicing to qualified personnel
the disc is loaded.
only.
No audio files recorded in supported formats, or a
file to be played back has an unsupported file
unplug the unit, and have it checked by qualified
extension.
personnel before operating it any further.
"DISC ERR" appears when the disc is loaded.
square, star) cannot be played on this unit.
The CD may be dirty. Clean the disc.
Attempting to do so may damage the unit. Do not
The CD may have scratches. Replace the disc.
use such discs.
The CD may have a reading problem. Replace the
disc.
A blank disc may be set in the CD compartment.
do not use any other cord.
The sound drops out.
be used for an extended period of time.
Reduce the volume.
Clean the CD, or replace it if the CD is badly
avoid damage that can be caused by battery
damaged.
leakage or corrosion.
Place the unit in a location free from vibrations.
Clean the lens with a commercially available
blower.
The sound may drop out or noise may be heard
sources, in a place subject to direct sunlight,
when using a poor quality CD-R/CD-RW or if there
excessive dust or mechanical shock, or in a car
is a problem with the recording device or
subject to the direct rays of the sun.
application software.
surface.
Starting playback takes more time than
usual.
the cabinet. The ventilation openings must be
The following discs take a longer time to start
unobstructed for the unit to operate properly and
playback.
prolong the life of its components.
A disc recorded with a complicated tree
structure.
keep personal credit cards using magnetic coding
A disc that has many folders or non-MP3/WMA
or spring-wound watches away from the unit to
files.
prevent possible damage from the magnet.
USB device
The USB device does not work properly.
warm location, or is placed in a very damp room,
If you connect an incompatible USB device, the
moisture may condense on the lens inside the CD
following problems may occur.
player section. Should this occur, the unit will not
The USB device is not recognized.
operate properly. In this case, remove the CD and
File or folder names are not displayed on this
wait about an hour for the moisture to evaporate.
unit.
Playback is not possible.
The sound skips.
There is noise.
dust and debris contamination.
The sound output is distorted.
" OVER CURRENT " appears and the unit
turns off automatically.
cloth slightly moistened with a mild detergent
solution. Do not use any type of abrasive pad,
An abnormal level has been detected in the
scouring powder, or solvent, such as alcohol or
electrical current from the (USB) port
benzine.
case, remove the USB device from the (USB) port
and reconnect the USB device, and then turn
on the unit again. If this problem persists after
turning on the power of the unit, contact your
nearest Sony dealer.
There is no sound.
The USB device may be connected incorrectly.
Turn off the unit and reconnect the USB device.
Then turn on the unit.
There is noise, skipping, or distorted sound.
Turn off the unit and reconnect the USB device.
Then turn on the unit again.
The music data itself contains noise, or the sound
is distorted. Noise may have entered during the
creation of audio files. Try re-creating audio files
and use them to play on this unit.
The USB device cannot be connected to the
(USB) port
.
The connector on the USB device or the USB cable
is being inserted backwards. Insert it to the
(USB) port
in the correct direction.
" READING " is displayed for an extended
time, or it takes a long time before playback
starts.
The reading process can take a long time in the
following cases:
There are many folders or files on the USB
device.
The file structure is complex.
The memory is almost full.
The internal memory is fragmented.
To avoid the above problems, we recommend that
you adhere to the following guidelines:
Keep the total number of folders on a USB
device to 100 or less.
Keep the total number of files per folder to 100
or less.
Erroneous display
The data stored on the USB device may be
corrupted. Send the music data to the USB device
again.
This unit can display only numbers and letters of
the alphabet. Other characters will not be
displayed correctly.
"REC ERROR" appears.
An error occurred during transferring. Turn off the
unit and remove the USB device from the unit.
Then check the following:
Check the remaining storage space on the USB
device. If there is insufficient space for the
transferring, delete any unnecessary files or
folders.
Check that the data to be transferred is not
corrupted.
Check that the file format to be transferred is
compatible with the unit.
If the message still persists, contact your nearest
Sony dealer.
The USB device is not recognized.
Specifications
Turn off the unit and reconnect the USB device,
then turn on the unit.
The USB device is not functioning properly. Refer
CD player section
to the USB device operation manual for details on
System
how to deal with this problem.
Compact disc digital audio system
Laser diode properties
Play does not start.
Emission duration: Continuous
Laser output: Less than 44.6 μW
Turn off the unit and reconnect the USB device.
(This output is the value measurement at a distance of
200 mm from the objective lens surface on the optical
Play does not start from the first track.
pick-up block with 7 mm aperture.)
Set the play mode to Normal Play.
Number of channels
2
MP3/WMA/AAC files cannot be played
Frequency response
back.
20 Hz 20,000 Hz +1/–2 dB
The audio files may have inappropriate file
Wow and flutter
extensions. The file extensions supported by this
Below measurable limit
unit are as follows:
BLUETOOTH section
MP3: file extension ".mp3"
Communication System
WMA: file extension ".wma"
BLUETOOTH Specification Version 2.1 + EDR
AAC: file extension ".m4a," ".3gp" and ".mp4"
Output
BLUETOOTH Specification Power Class 2
The audio files may have been created in formats
other than MP3/WMA/AAC formats.
Maximum communication range
Line of sight approx. 10 m*
The USB storage device uses a file system other
Frequency band
than FAT16 or FAT32.*
2.4 GHz band (2.4000 GHz 2.4835 GHz)
The files are encrypted or protected by passwords.
Modulation method
FHSS
* This unit supports FAT16 and FAT32, but some USB storage
Supported BLUETOOTH Profiles*
media may not support both file systems.
A2DP (Advanced Audio Distribution Profile)
For details, refer to the operation manual of the USB
AVRCP*
3
(Audio/Video Remote Control Profile)
storage device in question or contact the manufacturer.
Supported codec*
SBC (Subband Codec)
BLUETOOTH device
*
1
The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a
microwave oven, static electricity, reception sensitivity,
There is no sound.
aerial performance, operating system, application software,
etc.
Make sure that this unit is not too far from the
*
2
BLUETOOTH standard profiles provide the specifications for
BLUETOOTH device (or smartphone), or that this
BLUETOOTH communication between devices.
unit is not receiving interference from a wireless
*
3
Some operations may not be available depending on the
LAN, another 2.4 GHz wireless device, or a
device.
microwave oven.
*
4
Codec: Audio signal compression and conversion format.
Check that the BLUETOOTH connection was
Radio section
completed properly between this unit and the
Frequency range
BLUETOOTH device (or smartphone).
Models for Europe, Thailand, Kuwait, UAE, Kenya,
Mauritius, Nigeria, Tanzania, and Uganda
Perform pairing again (See "Pairing this unit with a
FM: 87.5 MHz 108 MHz (50 kHz step)
BLUETOOTH device").
AM: 531 kHz 1,602 kHz (9 kHz step)
Keep away from metal objects or surfaces.
Models for Bolivia, Chile, Paraguay, Peru, and Uruguay
Make sure that the BLUETOOTH function is
FM: 87.5 MHz 108 MHz (100 kHz step)
activated on the BLUETOOTH device (or
87.5 MHz 108 MHz (50 kHz step)
AM: 530 kHz 1,610 kHz (10 kHz step)
smartphone).
531 kHz 1,602 kHz (9 kHz step)
The sound skips or the correspondence
Models for Malaysia, Vietnam, India, Pakistan, Bahrain,
Iran, Lebanon, Qatar, Yemen, Angola, Cameroon, Cote
distance is short.
d'Ivoire, Egypt, Ethiopia, Ghana, Madagascar,
If a device that generates electromagnetic
Mozambique, Senegal, Sudan, Zambia, and Zimbabwe
FM: 87.5 MHz 108 MHz (50 kHz step)
radiation, such as a wireless LAN, other
87.5 MHz 108 MHz (100 kHz step)
BLUETOOTH device(s), or a microwave oven is
AM: 531 kHz 1,602 kHz (9 kHz step)
nearby, move away if possible. Or use the device
530 kHz 1,610 kHz (10 kHz step)
and the unit away from such sources.
Other models
Remove any obstacle between this unit and the
FM: 87.5 MHz 108 MHz (100 kHz step)
device or move the device and the unit away from
AM: 530 kHz 1,710 kHz (10 kHz step)
the obstacle.
Intermediate frequency
Locate this unit and the device as close to each
FM: 128 kHz
AM: 45 kHz
other as possible.
Antennas
Re-position this unit.
FM: Telescopic antenna
Try using the BLUETOOTH device or smartphone in
AM: Built-in ferrite bar antenna
another position.
Input
AUDIO IN
A connection cannot be established.
Stereo mini jack
Depending on the device to be connected, it may
(USB) port
require some time to start communication.
Type A, maximum current 500 mA, USB 2.0 Full Speed
Perform pairing again (See "Pairing this unit with a
compatible
BLUETOOTH device").
Output
Check that the BLUETOOTH device is compatible
(headphones) stereo mini jack
For 16
32
with this unit. For the latest information on
compatible BLUETOOTH devices, check the
Supported audio formats
information on the website. The URL is listed
Supported bit rates
under "Compatible BLUETOOTH devices."
MP3 (MPEG 1 Audio Layer-3):
32 kbps 320 kbps, VBR
Pairing fails.
WMA:
48 kbps 192 kbps, VBR
Bring the BLUETOOTH device closer to the unit.
AAC*:
8 kbps 320 kbps, VBR
Delete the model name of this unit from the
BLUETOOTH device and perform pairing again
* USB function only
(See "Pairing this unit with a BLUETOOTH device").
Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
Check that the BLUETOOTH device is compatible
32/44.1/48 kHz
with this unit. For the latest information on
WMA:
compatible BLUETOOTH devices, check the
32/44.1/48 kHz
information on the website. The URL is listed
AAC*:
under "Compatible BLUETOOTH devices."
32/44.1/48 kHz
* USB function only
Pairing using the NFC function fails.
General
Try pairing manually (See "Pairing this unit with a
Speaker
BLUETOOTH device"). Some NFC-compatible
Full range, 8 cm dia., 6
smartphones may not be paired using the NFC
Power output
2.0 W + 2.0 W (at 6
function of this unit, depending on the features or
specifications of the device.
Power requirements
Models for Europe, Bolivia, Chile, Paraguay, Peru, and
Relaunch "NFC Easy Connect" and move the
Uruguay
smartphone slowly over the N mark
.
230 V AC, 50 Hz (AC power supply)
Check that the smartphone meets the
9 V DC (6 R14 (size C) batteries)
compatibility requirements (See "Compatible
Models for Latin America (except for Bolivia, Chile,
smartphones").
Paraguay, Peru, and Uruguay)
120 V AC, 60 Hz (AC power supply)
9 V DC (6 R14 (size C) batteries)
Radio
Thai model
220 V AC, 50 Hz (AC power supply)
The sound is weak or reception is poor.
9 V DC (6 R14 (size C) batteries)
Replace all the batteries with new ones.
Other models
220 V 240 V AC, 50/60 Hz (AC power supply)
Move the unit away from nearby TVs.
9 V DC (6 R14 (size C) batteries)
For FM reception, extend the antenna to its full
Power consumption
length, and reorient it for best FM reception. For
15 W
AM reception, reorient the unit itself to find the
0.9 W (during standby mode)
best reception.
Battery Life*
1,
If you are in a building, listen near a window.
Playback of CD
Approx. 9 hours
If a mobile phone is placed close to the unit, a
Playback of USB device
loud noise may be heard from the unit. Keep the
Approx. 11 hours (at 100 mA load)
phone away from the unit.
Approx. 3 hours (at 500 mA load)
FM reception
The TV picture is unstable.
Approx. 26 hours
BLUETOOTH
If you are listening to an FM program near a TV
. In this
Approx. 13 hours
with an indoor antenna, move the unit away from
the TV.
*
1
Measured by Sony standards. The actual battery life
may vary depending on the circumstances of the unit
or operating conditions.
After trying the suggested remedies, if the problem
*
2
When using Sony alkaline batteries.
persists, unplug the AC power cord or remove all the
Dimensions
batteries. After all the indications on the display
Approx. 320 mm × 133 mm × 215 mm (W/H/D) (incl.
disappear, plug in the AC power cord again, or
projecting parts)
re-insert the batteries. If the problem persists,
Mass
consult your nearest Sony dealer.
Approx. 2.3 kg (incl. batteries)
Supplied accessories
AC power cord (1)
Design and specifications are subject to change without
notice.
License and Trademark Notice
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
Windows Media is either a registered trademark
or trademark of Microsoft Corporation in the
United States and/or other countries.
This product is protected by certain intellectual
property rights of Microsoft Corporation. Use or
distribution of such technology outside of this
product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
The BLUETOOTH word mark and logos are owned
by the Bluetooth SIG, Inc. and any use of such
marks by Sony Corporation is under license.
The N Mark is a trademark or registered trademark
of NFC Forum, Inc. in the United States and in
other countries.
Android™ and Google Play™ are trademarks of
Google Inc.
Other trademarks and trade names are those of
their respective owners. In this manual, ™ and
marks are not specified.
1
2
4
impedance headphones
, cone type (2)
, 10% harmonic distortion)
*
2
®