IVR Configuration Menu Options
• After you select an option, press the # (pound) key.
• To exit the menu, hang up the phone.
• After entering a value such as an IP address, press the # (pound) key to indicate that you have finished
• When entering a value, you can cancel the changes by pressing the * (star) key twice within half a second.
• If the menu is inactive for more than one minute, the IVR times out. Re-enter the IVR menu by pressing
• To enter special characters, use the following key combinations:
For example, to enter the IP address 191.168.1.105, perform the following tasks:
• Press these keys: 191*168*1*105
• Press the # (pound) key to indicate that you have finished entering the IP address.
• Press 1 to save the IP address or press the * (star) key to cancel your entry and return to the main menu.
IVR Configuration Menu Options
The following table describes the various options in the IVR Configuration Menu.
Table 3: Navigating the IVR Configuration Menu
Menu Option
100
Cisco ATA 191 User Guide for Cisco Unified Communications Manager
12
your selection. Then proceed as needed:
◦ To save a setting, press 1.
◦ To review a setting, press 2.
◦ To re-enter a setting, press 3.
◦ To cancel your entry and return to the main menu, press * (star).
Be sure to press the key quickly, or the * is treated as a decimal point entry.
****. Your settings take effect after you hang up the phone or exit the IVR. The ATA may reboot now.
◦ To enter a dot (.) or colon (:) that separates octets in the IP Address, press star (*).
◦ To enter the hexadecimal A, press the 2 key two times quickly.
◦ To enter the hexadecimal B, press the 2 key three times quickly.
◦ To enter the hexadecimal C, press the 2 key four times quickly.
◦ To enter the hexadecimal D, press the 3 key two times quickly.
◦ To enter the hexadecimal E, press the 3 key three times quickly.
◦ To enter the hexadecimal F, press the 3 key four times quickly.
IVR Action
(IPv4) Check the Internet Addressing
Method
Manage the ATA Using the IVR
Navigating Notes
Answers with 0, the default option (DHCP).
Imprimir página