DIGITIZE 1221 Manual de início rápido - Página 5

Procurar online ou descarregar pdf Manual de início rápido para Transmissor DIGITIZE 1221. DIGITIZE 1221 9 páginas. Radio transmitter option

1221 RADIO TRANSMITTER OPTION MANUAL

1.1

OVERVIEW

P/N 010001-0105

P/N 010001-0106

The 1221 Radio Transmitter option operates with SYSTEM 3500 units only and operates as a

1221 radio transmitter. The 1221 Radio Transmitter option permits the user to program any

dialer, zone or box to transmit any desired box number to the Fire Department receiving system.

However, the Fire Department may have their receiving system set up to only process boxes in

their negative box stack. Be sure to provide the Fire Department with a list of all box numbers

and zones programmed into your unit. Only one box number is used for daily test. The Fire

Department's hardware and software must be upgraded to permit entry of all of the box number(s)

to decode, but not to expect a daily test from the 'phantom boxes'. In other words, the SYSTEM

3500 may be programmed to send any desired box number via the @X command, but the

SYSTEM 3500 will only report one box number as the daily test.

The 1221 Radio Transmitter option consists of: Software, configurator card (P/N 450526-0001)

and AM Transmitter Assembly (P/N 450387-0001, 72-76 MHz or 450387-0002, 32-174 MHz).

The frequency must be specified at the time the order is placed with the factory.

1.2

The AM Transmitter Assembly is shipped separately and must be mounted to the SYSTEM 3500,

using the self-adhesive Velcro® provided. Connect the 10-pin cable from the AM transmitter to

connector P1 on configurator card 400526-0001.

1.2.1 RETROFIT INSTALLATION

Retrofit installations require the purchase of the CPUVI Program Diskette (P/N 450423-1019)

at an additional charge.

Install configurator card on any available serial port on the rear of the System 3500. Upload

new software using CPUVI Program Diskette. When the System 3500 initializes the

following message appears on the display:

Enter the Port number for the configurator card. Ports cannot be duplicated. The following

message will appear on the thermal paper tape:

Press SET to confirm the other serial port assignments.

DIGITIZE, INC. 700235-A 6/00

1221 Radio Transmitter Option, 72 – 76 MHz

1221 Radio Transmitter Option, 132-174 MHz

1221 RAD @X

is now PORT # F

SET to continue

enter PORT # __

PORT # X 1221 @X

8 BIT 1200 BAUD

NO Parity, 1 Stop

Specifications Subject to Change Without Notice