Cisco Catalyst 3030 Manual de iniciação - Página 21

Procurar online ou descarregar pdf Manual de iniciação para Hardware de rede Cisco Catalyst 3030. Cisco Catalyst 3030 34 páginas. Cisco systems catalyst blade switch getting started guide

Imprimir página

Cisco Catalyst Blade Switch 3030 Getting Started Guide

Installation Warning Statements

Insert an appropriate cable into the SFP module port. Insert the other cable end

Step 2

into the other device (see

Figure

9).

Figure 9

Inserting the Cable into the SFP Module Port

1 6 x

1 5 x

1 2 x

1 4 x

1 1 x

1 3 x

C o n s o le

1 6 x

1 5 x

1 4 x

1 3 x

1 2 x

1 1 x

C O N

For a list of supported modules, see the release notes on Cisco.com. For detailed

instructions on installing, removing, and connecting to SFP modules, see the

documentation that came with the SFP module.

Removing and installing an SFP module can shorten its useful life. Do not remove

Caution

and insert SFP modules more often than is absolutely necessary.

Verify Port Connectivity

After you connect to the switch port, the port LED turns amber while the switch

establishes a link. This process takes about 30 seconds, and then the LED turns

green when the switch and the target device have an established link. If the LED

is off, the target device might not be turned on, there might be a cable problem, or

there might be a problem with the adapter installed in the target device. See the

"In Case of Difficulty" section on page 1-22

for information about online

assistance.

Cisco Catalyst Blade Switch 3030 Getting Started Guide

1-21

78-17052-01