Cisco Catalyst 6000 WS-F6K-MSFC2 Nota de instalação - Página 10

Procurar online ou descarregar pdf Nota de instalação para Hardware de rede Cisco Catalyst 6000 WS-F6K-MSFC2. Cisco Catalyst 6000 WS-F6K-MSFC2 18 páginas. Catalyst 6000 series multilayer switch feature card 2

Imprimir página

Installing the MSFC2

Figure 3

Hold here

Hold the top edge of the MSFC with your right hand and the bottom-left edge with your left hand

Step 4

(see

supervisor engine.

Caution

Use care not to damage the connectors on the supervisor engine. If you damage a connector, you will

have to return the supervisor engine to Cisco for repair.

Place the MSFC on an antistatic mat or antistatic foam pad.

Step 5

Installing the MSFC2

The MSFC2 is designed to be installed on a Supervisor Engine 1A and a Supervisor Engine 2.

Note

The standoff locations on the different supervisor engines may not be the same. Not all mounting

holes on the MSFC2 will be used in all installations. Visually verify that there are standoffs beneath

the mounting holes before installing the securing screws.

Catalyst 6000 Family Multilayer Switch Feature Card 2 Installation Note

Removing Securing Screws and Cap Nut

Hold here

WS-X5530

SUPERVISOR ENGINE I I I

CONSOLE

Figure

3). Gently lift the MSFC with both hands simultaneously and remove the MSFC from the

SWITCH LOAD

100%

cap nut

78-10605-03