Cisco Catalyst 7500 Series Manual de configuração - Página 39
Procurar online ou descarregar pdf Manual de configuração para Hardware de rede Cisco Catalyst 7500 Series. Cisco Catalyst 7500 Series 50 páginas. Chassis interface board
Também para Cisco Catalyst 7500 Series: Ficha de dados (11 páginas), Manual de resolução de problemas (11 páginas), Substituição do manual (40 páginas)
Imprimir página
Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs
b Enter the commands:
config 802.11a network disable
config 802.11a 11nsupport a-msdu tx priority all disable
config 802.11a network enable
save config
3
If an 1142 ap is in use, disable mpdu aggregation.
Connect to the CLI as described in the section "Configuring a New Controller Starting
a
from Factory Defaults".
b Enter the commands:
config 802.11a network disable
config 802.11a 11nsupport a-mpdu tx priority all disable
config 802.11a network enable
save config
4
In the navigation pane under 802.11a/n, select Network.
5
For 802.11a Network Status, click the Enabled check box.
6
Click the Apply button to save the settings.
721-1001-000-AH.docx
December 2016
39