Cisco Cisco mds 9216 - fabric switch Manual de instalação do hardware - Página 11

Procurar online ou descarregar pdf Manual de instalação do hardware para Hardware de rede Cisco Cisco mds 9216 - fabric switch. Cisco Cisco mds 9216 - fabric switch 36 páginas. Multilayer fabric switch
Também para Cisco Cisco mds 9216 - fabric switch: Manual de ligação (13 páginas), Manual de configuração (49 páginas), Nota de lançamento (48 páginas), Nota de lançamento (44 páginas), Nota de lançamento (44 páginas), Nota de lançamento (36 páginas), Nota de lançamento (26 páginas), Nota de lançamento (22 páginas), Manual de referência rápida (14 páginas), Nota de lançamento (3 páginas), Especificação (11 páginas)

Chapter 2

Installing the Cisco MDS 9216 Switch

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .

Figure 2-6

Installing the Switch in a Cabinet with Insufficient Front

Clearance

This section describes how to use the rack-mount kit provided with the switch to install the Cisco MDS

9216 Switch into a cabinet with insufficient front-facing clearance. The Cisco MDS 9216 Switch is

installed rear-facing to provide adequate clearance for the fiber optic cables. This cabinet meets the

requirements described in

three inches of clearance between the inside of the front door or bezel panel and the front cabinet

mounting rails. This rear-facing installation is necessary to ensure that the minimum bend radius for the

fiber optic cables is maintained. In these cabinets, the Cisco MDS 9216 Switch is mounted backwards,

with the fiber optic cables facing toward the rear of the cabinet and the power supplies facing the front

of the cabinet.

Caution

If the rack is on wheels, ensure that the brakes are engaged or that the rack is otherwise stabilized.

OL-6985-01

shows the Cisco MDS 9216 Switch completely installed in a rack.

Cisco MDS 9216 Switch Chassis Installed in the Rack

M D

9 2

1 6

Appendix A, "Cabinet and Rack Installation,"

Installing the Switch in a Cabinet with Insufficient Front Clearance

except the cabinet has less than

Cisco MDS 9216 Switch Hardware Installation Guide

2-11