Cisco Cisco mds 9216 - fabric switch Manual de instalação do hardware - Página 24

Procurar online ou descarregar pdf Manual de instalação do hardware para Hardware de rede Cisco Cisco mds 9216 - fabric switch. Cisco Cisco mds 9216 - fabric switch 36 páginas. Multilayer fabric switch
Também para Cisco Cisco mds 9216 - fabric switch: Manual de ligação (13 páginas), Manual de configuração (49 páginas), Nota de lançamento (48 páginas), Nota de lançamento (44 páginas), Nota de lançamento (44 páginas), Nota de lançamento (36 páginas), Nota de lançamento (26 páginas), Nota de lançamento (22 páginas), Manual de referência rápida (14 páginas), Nota de lançamento (3 páginas), Especificação (11 páginas)

Removing and Installing Components

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .

A setup utility automatically launches the first time you access the switch and guides you through the

Note

basic configuration. For instructions on how to configure the switch and check module connectivity,

refer to

Cisco MDS 9000 Family configuration guides.

Removing and Installing Components

This section provides the following information:

•

Hazardous voltage or energy is present on the backplane when the system is operating. Use caution

Warning

when servicing. Statement 1034

To prevent ESD damage, wear grounding wrist straps during these procedures and handle modules by

Caution

the carrier edges only.

Removing and Installing Switching and Services Modules

Slot 1 is reserved for the supervisor module with its integrated multiport switching or IP services

module. Slot 2 can contain an optional module. See

Warning

Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into

beams or view directly with optical instruments. Statement 1051

Warning

Use of controls, adjustments, or performing procedures other than those specified may result in

hazardous radiation exposure. Statement 1057

Warning

Hazardous voltage or energy is present on the backplane when the system is operating. Use caution

when servicing. Statement 1034

To prevent ESD damage, wear grounding wrist straps during these procedures and handle modules by

Caution

the carrier edges only.

Cisco MDS 9216 Switch Hardware Installation Guide

2-24

http://www.cisco.com/univercd/cc/td/doc/product/sn5000/mds9000/index.htm

Removing and Installing Switching and Services Modules, page 2-24

Maintaining a Caching Services Module, page 2-30

Removing and Installing Power Supplies, page 2-31

Removing and Installing the Fan Module, page 2-33

Chapter 2

Installing the Cisco MDS 9216 Switch

Figure 1-1

for slot locations.

for the latest

OL-6985-01