Digitone Call Blocker Lista de códigos

Procurar online ou descarregar pdf Lista de códigos para Acessórios para telefones Digitone Call Blocker. Digitone Call Blocker 2 páginas. Automatically blocks and routes screened calls with caller id
Também para Digitone Call Blocker: Manual do Proprietário (13 páginas)

Imprimir página

Mode

Code

Action

Standard

(default)

Mode

Business

Mode

Standby

Mode

Call Blocker Codes and Procedures

When calls come in, all phone numbers that are Invited will ring phones

throughout your home/office like normal and to the TEL phone port on the back

of the Call Blocker, except for Anonymous, Out Of Area, Private and Unknown

callers showing no phone number. These calls will be answered by the Call

Blocker for processing and by default be hung-up on unless program Code 72 is

enabled to allow these call types to ring in. Blocked callers will be immediately

answered and after eight seconds, get hung-up on.

To enable this (default) Mode, press and hold the Program Button for 3 seconds

until you see "Program Mode", then "Pick Up Phone", when the prompt for

"Enter Code" displays enter code 30, display shows function. You can use Code

76 to override the block function for Out of Area + no number call types or Code

74 to override the block function for Private + no number call types. These two

codes will allow those callers you need to hear from Out of Area (overseas) or

Private (neighbors) to ring through. You can also use Code 52 to invite up to 10

callers within a blocked area code.

If you are running a business and want to hear from Anonymous, Out Of Area,

Private and Unknown callers as well as any other type of call, you can enable

Business Mode Code 31 to allow calls through to the TEL phone port except

those you want to block. This mode also works with your phone company's

voice mail but also blocks those phone numbers you have entered into the

Blocked Callers List. Blocked callers will be immediately answered and after

eight seconds get hung-up on.

To enable this Mode, press and hold the Program Button for 3 seconds until you

see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code"

displays enter code 31, display shows function.

In Standby, the TEL phone port will be connected directly to the telephone line

and phones connected there will ring. This feature allows you to leave the Call

Blocker off whenever you like without disconnecting the device and the RED

light will blink slowly.

To enable this Mode, press and hold the Program Button for 3 seconds until you

see "Program Mode", then "Pick Up Phone", when the prompt for "Enter Code"

displays enter code 32, display shows function.

Explanation